1952 Chevrolet Bel Air Base Hardtop 2-door Kustom on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

2013 Chevy COPO Camaro announced with two new engines and manual option

Chevrolet is following up the 2012 COPO Camaro with another limited run of the drag-strip-ready production car for 2013. Ditching the superchargers, the 2013 COPO Camaro can only be equipped with one of three naturally aspirated V8 engines, and other new features include the option of a manual transmission, new front springs, some minor styling changes and a lower starting price of $86,000. All cars are designed to abide by the rules of the NHRA's Stock Eliminator or Super Stock classifications, depending on in which series buyers wish to enter their Chevrolet Camaro.
Returning for 2013 is the 427-cubic-inch V8 producing 425 horsepower, but the new engines include a 325-hp 350-CID V8 and a 375-hp 396-CID V8. Buyers can select to purchase all three engines, and each will be matched with the sequence number of that car; the track-only COPO cars will not have vehicle identification numbers and can't be registered for street use.
Chevrolet is also offering unique enthusiast-specific options such as a COPO Build Book and the opportunity for owners to help assemble their car's engine at the Chevrolet Performance Build Center in Wixom, MI.

Chevy Volt replacement battery cost varies wildly, up to $34,000

There's a growing hubbub in the plug-in vehicle community over what looks like some ridiculously cheap replacement batteries for the Chevrolet Volt going up for sale. GM Parts Online, for example, is selling a replacement Volt battery with an MSRP of $2,994.64 but, with an online discount, the price comes down to $2,305.88. For the 16-kWh pack in the 2012 Volt, that comes to a very low $144.11 per kilowatt hour (kWH). But is it a real deal? How can it be, when a Chevy dealer may quote you a price of up to $34,000 to replace the pack? For a 16-kWh Volt pack, $2,305.88 comes to a very low $144.11 per kWh. But is it a real deal? Battery packs in alternative propulsion vehicles are usually priced by the kWh and, historically, they've been thought to be in the range of $500-per-kWh for OEM offerings. Since automakers are understandably secretive about their costs, we still don't know what the real number is today, but we do know it varies by automaker. Tesla, for example, has said it pays less than $200-per-kWH at the cell level but, of course, a constructed pack would be more. Whatever is going on, li-ion battery prices are trending downward. So, $144.11 certainly sounds great, but what's the story here? Kevin Kelly, manager of electrification technology communications for General Motors, reminded AutoblogGreen that GM Parts Online is not the official GM parts website and that, "the costs indicated on the site are not what we would charge our dealers or owners for a replacement battery. There would be no cost to the Volt owner if their battery needs replacement or repair while the battery is under the eight year/100,000 mile limited warranty coverage provided by Chevrolet." A single price tag also can't be accurate for everyone, Kelly said. "If the customer needs to have their battery repaired beyond the warranty, the cost to them would vary depending on what needs to be replaced or repaired (i.e. number of modules, which specific internal components need replacement, etc.)." he said. "So, it's hard for us to tell you exactly what the cost would be to the customer because it varies depending on what might need to be repaired/replaced. As a result, the core charge would vary." But, is the $2,300 price even accurate for anyone? Thanks to a reader comment, we see that this similar item on New GM Parts makes it look like the lithium-ion modules that Kelly mentioned – where a lot of the expensive bits are – are not included.