2006 Chevy Trailblazer Ss Awd Sunroof Nav Dvd 20's 47k Texas Direct Auto on 2040-cars

Auto blog

GM recalls 64k 2011-2013 Volts over carbon monoxide fears, stop sale on Trax and Encore

General Motors is recalling 50,249 Chevrolet Volts from the 2011-2013 model years in the US and an additional 13,937 exported examples because of fears over carbon monoxide buildup. According to a statement, if a Volt is accidentally left on while running on electric power, its internal combustion engine would eventually kick on to charge on the battery. If this happens in an enclosed space, then carbon monoxide can fill the area, leading to a potential exposure to the dangerous gas. According to GM, there have been two injuries reported due to this issue. To fix the problem, there's a software update to limit the time the vehicle can idle. According to Automotive News, GM is also issuing a stop sale on about 2,300 examples of the 2015 Chevrolet Trax and Buick Encore. In these compact crossovers, it's possible that the steering column assembly could touch the power steering circuit board and cause damage over time. This could potentially cause the system to stop working. Automotive News indicates that the automaker is still working with the supplier to get the necessary parts to repair this problem. General Motors is recalling 50,249 Chevrolet Volts in the U.S. from the 2011-2013 model years to implement a software update that will limit the amount of time a vehicle can be left idling in the "on" or "run" position. If a driver exits the vehicle and inadvertently leaves the vehicle "on" by failing to react to cues and warning chimes emitted by the vehicle, the vehicle's high-voltage battery will drain after a period of time and the gasoline engine will begin to run. If the gas engine runs for a long period of time within an enclosed space, such as a garage, carbon monoxide could build up. GM is aware of two injuries, both related to carbon monoxide build up. The total recall population including Canada and exports is 64,186. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.