2013 Lt Used 5.3l V8 16v Automatic 4wd Suv Bose Onstar on 2040-cars

Auto blog

What we know, and think we know, about the 2016 Chevy Volt

With the next-gen Chevy Volt due to make an appearance at the Detroit Auto Show early next year, bits and pieces about the new car are making their way into the press. Perhaps most importantly, the new Volt is going to have better "fuel economy and efficiency," according to GM executive vice president Mark Reuss. The current Volt gets 98 MPGe and 37 miles per gallon on premium fuel. It also has a 38-mile electric-only range. We don't know how GM will improve the efficiency or to what degree, but the logical options include making the car lighter, giving it better aerodynamics and/or improving the powertrain. To that end, one of the big things we don't know for sure includes information on the new gas-powered engine. Forbes says it will be a downsized 1.0-liter, three-cylinder mill instead of the 1.4-liter, four-cylinder used in the current model, which could certainly help the car be more efficient. The new Volt is also going to have more technology, which shouldn't surprise anyone. GM is now openly talking about how it will change the way it markets the Volt, shifting away from the mass-market mentality to focus on the regions where the car is already popular. "There's a Northeast and West Coast market for Volt, and there's nothing wrong with that," Chevy chief marketing officer Tim Mahoney told Forbes. There are rumors that the new Volt will have seating for five by adding a seat in the back. This is something a lot of current Volt owners would love, but we've heard nothing official hinting that this would be the case. We expect the battery to be the new 17.1-kWh version, or maybe even have a capacity increase, so GM would have to seriously repackage the pack to eliminate the ridge that runs from between the front seats and then back to the rear two seats. If you've heard anything official, do let us know.

Chevrolet Captiva looks mildly refreshed and ready for family duty

We showed you Chevrolet's major debut yesterday, the 2014 Corvette Stingray Convertible, but General Motors is making a big push for Bowtie consideration in Europe, so it's also introducing the updated Captiva crossover here at the Geneva Motor Show.
While still based on the same platform as North America's fleet-only Captiva Sport (which is effectively a rebadged Saturn Vue), the Captiva is available in both five- and seven-seat iterations, and it looks far more modern. That's particularly the case with this updated model, which features revamped front- and rear ends that include restyled bumpers, grilles and LED taillamps, among other changes.
As before, the midsize Theta-platform CUV will be available in both front- and all-wheel drive, and is expected to carry a range of four- and six-cylinder gasoline and diesel engines. Important US programming note: Chevrolet sources tell us that America's Captiva Sport will not receive these updates.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.