2011 Chevrolet Silverado 3500 Hd Ltz Crew Cab Drw 6.6l Ford F-150 F-250 F-350 on 2040-cars

Auto blog

Cruze Diesel Road Trip reveals the good and bad, but no ugly

Most of us have strong opinions on diesel-powered cars based on our perceptions of and experience with them. I used to thoroughly dislike oil burners for their noise, smoke and lackluster performance, and the fact that they ran on greasy, smelly stuff that was more expensive than gasoline, could be hard to find and was nasty to get on your hands when refueling. Those negatives, for me, trumped diesel's major positives of big torque for strong acceleration and better fuel economy. Are any of those knocks on diesel still valid today? I'm not talking semis, which continue to annoy me when their operators for some reason almost never shut them down. At any busy truck stop, the air seems always filled with the sound – and sometimes smell – of dozens of big-rig diesels idling endlessly and mindlessly. Or diesel heavy-duty pickups. Those muscular workhorses are far more refined than they once were and burn much less fuel than their gasoline counterparts. But good luck arriving home late at night, or departing early morning, without waking your housemates and neighbors with their clattery racket. No, I'm talking diesel-powered passenger cars, which account for more than half the market in Europe (diesel fuel is cheaper there) yet still barely bump the sales charts in North America. Diesel fuel remains more expensive here, too few stations carry it, and too many Americans remember when diesel cars were noisy, smelly slugs. Also, US emissions requirements make them substantially more expensive to certify, and therefore to buy. But put aside (if you can) higher vehicle purchase and fuel prices, and today's diesel cars can be delightful to drive while delivering much better fuel efficiency than gas-powered versions. So far in the US, all except Chevrolet's compact Cruze Diesel come from German brands, and all are amazingly quiet, visually clean (no smoke) and can be torquey-fun to drive. When a GM Powertrain engineering team set out to modify a tried-and-true GM of Europe turbodiesel four for North American Chevy Cruze compacts, says assistant chief engineer Mike Siegrist, it had a clear target in mind: the Volkswagen Jetta TDI 2.0-liter diesel. And they'll tell you that they beat it in nearly every way. "I believe we have a superior product," he says. "It's powerful, efficient and clean, and it will change perceptions of what a diesel car can be." The 2.0L Cruze turbodiesel pumps out 151 SAE certified horses and 264 pound-feet of torque (at just 2,000 rpm) vs.

Chevy EN-V 2.0 coming to Tianjin Eco-City in China

Chevrolet is bringing its EN-V 2.0 to the Sino-Singapore Tianjin Eco-City in China to show off the "Electric Networked-Vehicle" and demonstrate sustainable urban mobility. The small, two-seat EV concept is an updated version of the original EN-V, a vision of getting around in a future world where space is at a premium and clean air is a priority. So what better place to showcase the evolved EN-V than at the Tianjin Eco-City? The Eco-City is being developed as a planned urban space with eco-consciousness built in. The joint venture between China and Singapore offers an alternative to country living and smog-filled cities. Tianjin Eco-City, slated to be completed by 2020, will be able to offer 350,000 inhabitants clean air and water, renewable energy, green transportation and living spaces and, if all goes as planned, jobs for 50 percent of the residents. Currently, only about three square kilometers of the planned 30 square kilometers have been built, with only about 6,000 permanent residents, but there's still time. The EN-V 2.0, as the "Networked" part of its name suggests, not only features mobile internet, but can communicate with other cars around it. Along with GPS and built-in sensors, this connection between vehicles allows the car to drive autonomously (at least in theory - again, there's still time). This is ideal in an urban environment where congestion can be a major issue. The EN-V 2.0 improves upon the original concept with climate control, storage space and all-weather capability, which also make life more bearable and daily commuting possible. We first saw renderings of the updated vehicle in 2012. The Chevrolet EN-V 2.0 will be used in the Eco-City's National Animation Industry Park and Eco-Business Park of the course of the two-week demonstration. Read on below for more in the press release from GM. GM to Demonstrate Chevrolet EN-V 2.0 in Tianjin Eco-City SHANGHAI – General Motors today announced that it will begin demonstrating the Chevrolet EN-V 2.0 (Electric Networked-Vehicle) in the Sino-Singapore Tianjin Eco-City this week, signaling the company's learning and progress in sustainable urban mobility. The demonstration will help GM further understand consumers' usage of low-speed transportation tools for their daily commute. During the two-week demonstration period, the EN-V 2.0s will be used in the National Animation Industry Park and Eco-Business Park inside the Sino-Singapore Tianjin Eco-City.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.