2006 Chevrolet Silverado 2500 Hd Lt Crew Cab Pickup 4-door 6.6l / Train Horns! on 2040-cars

Auto blog

GM cutting production at two plants

General Motors is continuing to adjust to excess supply of some of its brands' models. To get production more in line with the vehicles' actual demand, the automotive giant is idling two of its factories in North America in the coming months. The Orion Assembly plant is going to be down from March 9-13, according to an anonymous plant worker and another insider speaking to Automotive News. The factory builds the Chevrolet Sonic and Buick Verano, but there are plenty of both models sitting on dealer lots, including 216 days worth of Sonics, according to AN. The factory already had two idle periods announced to reduce the excess. In addition, downtime is scheduled at GM's "Flex" line at the Oshawa, Ontario, Canada, plant from April 13-17. This affects supply of the Chevrolet Camaro, Impala, Buick Regal and Cadillac XTS. Among them, the automotive giant has the largest supply of Regals ready for dealers with 213 days worth of them, according to AN. The future for the whole Oshawa factory is cloudy in general, though. There are rumors that it could close entirely in the future because the Camaro is leaving and the Regal and XTS might not last much longer than 2017. The Canadian government and the labor union there intend to put up a fight, though. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Cadillac Chevrolet GM orion assembly oshawa plant idle

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Impala SS vs. Marauder: Recalling Detroit’s muscle sedans 

Impala SS vs. Marauder — it was comparo that only really happened in theory. ChevyÂ’s muscle sedan ran from 1994-96, while MercuryÂ’s answer arrived in 2003 and only lasted until 2004. TheyÂ’re linked inextricably, as there were few options for powerful American sedans during that milquetoast period for enthusiasts. The debate was reignited recently among Autoblog editors when a pristine 1996 Chevy Impala SS with just 2,173 miles on the odometer hit the market on Bring a Trailer. Most of the staff favored the Impala for its sinister looks and said that it lived up to its billing as a legit muscle car. Nearly two-thirds of you agree. We ran an unscientific Twitter poll that generated 851 votes, 63.9 percent of which backed the Impala. Muscle sedans, take your pick: — Greg Migliore (@GregMigliore) April 14, 2020 Then and now enthusiasts felt the Impala was a more complete execution with guts. The Marauder, despite coming along later, felt more hacked together, according to prevailing sentiments. Why? On purpose and on paper theyÂ’re similar. The ImpalaÂ’s 5.7-liter LT1 V8 making 260 horsepower and 330 pound-feet of torque was impressive for a two-ton sedan in the mid-Â’90s. The Marauder was actually more powerful — its 4.6-liter V8 was rated at 302 hp and 318 lb-ft. The ImpalaÂ’s engine was also used in the C4 Corvette. The MarauderÂ’s mill was shared with the Mustang Mach 1. You can see why they resonated so deeply with Boomers longing for a bygone era and also captured the attention of coming-of-age Gen Xers. Car and DriverÂ’s staff gave the Marauder a lukewarm review back in ‘03, citing its solid handling and features, yet knocking the sedan for being slow off the line. In a Hemmings article appropriately called “Autopsy” from 2004, the ImpalaÂ’s stronger low-end torque and smooth shifting transmission earned praise, separating it from the more sluggish Mercury. All of this was captured in the carsÂ’ acceleration times, highlighting metrically the differences in their character. The Impala hit 60 miles per hour in 6.5 seconds, while the Marauder was a half-second slower, according to C/D testing. Other sites have them closer together, which reinforces the premise it really was the little things that separated these muscle cars. Both made the most of their genetics, riding on ancient platforms (FordÂ’s Panther and General MotorsÂ’ B-body) that preceded these cars by decades. Both had iconic names.