2005 Chevy Silverado Ls-1500 Extended Cab 4.8 Dark Blue on 2040-cars

Auto blog

Dale Earnhardt, Jr. puts his Callaway Corvette and '55 Chevy on eBay

Dale Earnhardt, Jr. has put a couple of his personal cars up for sale on eBay. The first is a 1955 Chevy Bel Air that Junior had reworked by Funkmaster Flex, a bit of a diversion from Flex's more common Ford efforts. Junior's ride has a replacement chassis from Jim Meyer Racing, a 434 small-block tuned by Sharioff Racing to 500 horsepower, and truly thin rubber on what appear to be aluminum billet rims with Junior's former number 8 on the center caps. The interior is all custom and painted to match the outside, and those seats have been completely reupholstered. The second car is a 1999 Callaway C12, the 18th of 19 C12s built that year and featured in a 2002 issue of AutoWeek. It joined Earnhardt's private collection in 2004. Built on the base of a C5 Chevrolet Corvette and using a lot of technical know-how from Callaway's European racing program, the BMW #287 Blue Pearl C12 had its V8 bored out to 6.2 liters and graced with Callaway's Supernatural upgrade; it also has a Callaway coil-over suspension with adjustable dampers. There's new bodywork all around, and when new it cost about $200,000. At the time of writing bidding on the Bel Air was up to $80,100, the C12 was at $63,100. The auction ends Monday morning, and the winning bidders have the option of having their prizes autographed and retrieving the keys from Dale Jr himself if they're willing to go to Moorseville, NC. Featured Gallery Dale Earnhardt Jr. '55 Chevy Bel-Air View 28 Photos Related Gallery Dale Earnhardt Jr. Callaway C12 View 24 Photos News Source: Dale Earnhardt Jr via eBay [1], [2] Aftermarket Celebrities Chevrolet Auctions Coupe Luxury Special and Limited Editions Performance Classics eBay callaway callaway corvette Chevy Bel Air

GM recalls 200k Hummer H3s for fire risk

An issue with fires erupting in some Hummers has prompted General Motors and the National Highway Traffic Safety Administration to issue a recall for nearly 200,000 vehicles around the world. The bulk of them are in the United States. According to the first statement (below) obtained by Autoblog from GM, the issue stems from the HVAC system in Hummer H3 models. The connector module for the blower motor has, in certain cases, overheated, melted the surrounding plastic, and started a fire. 42 such cases have been reported, including three instances of occupants citing minor burns. GM confirms that two of those three cases lead to the vehicle being destroyed in the fire, but states that no crashes or fatalities have resulted. The issue affects 196,379 examples of the 2006-10 H3 wagon and the 2009-10 H3T pickup, with 164,993 estimated to be in the United States. In order to fix the issue, dealers are being instructed to replace the relevant parts of the connector and harness. In a second, unrelated campaign, GM is also calling in 50,731 Chevy Spark and Sonic small cars – 45,785 of them in the US – due to a software glitch. In those affected vehicles fitted with the base radio and OnStar system, the audio system may not be able to switch out of turn-by-turn direction mode, causing the display to go blank and all sound to mute – including key safety warnings. In addition, the system may not switch off, draining the battery. GM states that no crashes, injuries, or fatalities have resulted from this issue, and all that dealers will need to do in this case is reflash the software. Related Video: General Motors is recalling 164,993 2006-2010 model year HUMMER H3 and 2009-2010 model year HUMMER H3T models in the U.S. In certain vehicles, the connector module that controls the blower motor speed in the heat/vent/air conditioning (HVAC) system may overheat under extended periods of operation at high- and medium-high speeds. The heat could melt the plastic surrounding the connector module, increasing the risk of a fire. Dealers will replace the affected portion of the connector and harness. GM is aware of three reported minor burns and 42 fires but no crashes or fatalities related to this condition. Including Canada, Mexico and exports, the total recall population is 196,379. ### General Motors is recalling 45,785 2014-2015 model year Chevrolet Sparks, and 2015 model year Chevrolet Sonics in the U.S.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: