Find or Sell Used Cars, Trucks, and SUVs in USA

1988 Chevrolet Silverado 1500 Stepside on 2040-cars

Year:1988 Mileage:128358
Location:

Prineville, Oregon, United States

Prineville, Oregon, United States
Advertising:
Transmission:Automatic 700R4
Body Type:Pickup Truck
Engine:5.7
Vehicle Title:Clear
VIN: 1GCDC14K5JZ229894 Year: 1988
Mileage: 128,358
Make: Chevrolet
Number of Cylinders: 8
Model: Silverado 1500
Trim: Silverado
Drive Type: 2 wheel drive
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

This is a very nice, clean, little step side Chevy that is in excellent mechanical condition and runs very good and strong.  The previous owner replaced the engine with a new crate engine about 30K miles ago.  I just replaced the 700R4 transmission less than 500 miles ago.  I have also just replaced the fuel pump, the fuel pump relay, and the oil sending unit.  The paint does have some of the clear coat peeling on the top and the top of the drivers door.  The bed has a Line X liner,  older, but still in good condition.  The tires are Toyo Proxes,  295/45 on back, 255/45 on front, mounted on 18"X 8.5" Milarri rims.  The tires and rims have very low miles on them.  The truck has been professionally lower and handles very good.  The exhaust is a single into a Magnaflow muffler with dual exits and tailpipes that exit under the back bumper.  The interior is in good condition, not perfect, but good.  The only issues that I am aware of are with the a/c and the door locks.  The a/c is complete and operable, but does not blow cold air.  The door key will not unlock the doors.  It is the correct key, but just won't lock or unlock the doors.  Please ask questions prior to bidding,  feel free to call if you need additional pictures of information.  541-260-0799,  9 a.m. to 9 p.m. Pacific time.

Chevrolet Silverado 1500 for Sale

Auto Services in Oregon

Tualatin Auto Body & So - Cal Northwest ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: Rockaway-Beach
Phone: (503) 692-1579

True Form Collison Repair ★★★★★

Automobile Body Repairing & Painting
Address: 801 E 1st St, Newberg
Phone: (503) 538-2905

Truck Diesel & Off Road ★★★★★

Auto Repair & Service, Truck Service & Repair, Four Wheel Drive Vehicles-Supplies & Parts
Address: 3510 SW 209th Aveste B, King-City
Phone: (503) 649-4122

T V G Inc ★★★★★

Auto Repair & Service, Brake Repair, Automobile Electric Service
Address: 945 SE 12th Ave, Portland
Phone: (503) 902-6269

T L Morgan Motors ★★★★★

Used Car Dealers
Address: 1855 S A St, Marcola
Phone: (541) 747-5714

T & M Towing ★★★★★

Auto Repair & Service, Towing
Address: 29887 Kelso St, Coburg
Phone: (541) 485-3106

Auto blog

GM announces 3 new recalls affecting 1.7M vehicles in North America [w/video]

Mon, Mar 17 2014

Still embroiled in the ongoing ignition switch recall, General Motors announced today three more discrete recalls, affecting a grand total of 1,546,900 vehicles in the US. The Detroit News reports that some 1.7 million vehicles are affected overall in North America. The first and largest of the trio of new recalls concerns some 1.18-million Buick Enclave and GMC Acadia crossovers from the 2008-2013 model years, Chevrolet Traverse from 2009-2013 (pictured above) and Saturn Outlook vehicles from 2008-2010. All of the crossover utilities may have an issue with the wiring harness for their seat-mounted side airbags. Apparently, the vehicles are equipped with a Service Air Bag warning light that, if ignored, "will eventually result in the non-deployment of the side impact restraints." Those restraints include the side airbags, a front-center airbag if the vehicle is so equipped and seatbelt pretensioners. Dealers of affected vehicles will be instructed to remove driver and passenger side airbag wiring harness connectors, and then "splice and solder the wires together." The second recall affects 303,000 Chevrolet Express (pictured right) and GMC Savana vans from model years 2009-2014, and with gross vehicle weights under 10,000 pounds. Said vehicles do not comply with a head impact requirement for unrestrained occupants, and will need a reworking of the instrument panel material to be sent back on the road. It doesn't sound as though there's a quick fix for this one, as the GM press release states: "Unsold vehicles have been placed on a stop delivery until development of the solution has been completed and parts are available." Finally, the third recall affects 63,900 Cadillac XTS luxury sedans from model years 2013 and 2014. A brake booster pump may be susceptible to corrosion by way of the relay, potentially causing and electrical short, overheating, melting of plastic components and even engine fires. GM says it is aware of two engine fires in unsold XTS models and two cases of melted parts. Repairs for the issues affecting the XTS have not not mentioned by GM in the release. The Detroit News is also reporting that along with news of the triple-recall, GM is taking a $300-million credit to help pay for the repair costs, and to deal with the ongoing costs associated with the ignition switch recall. In an attempt to explain just what GM has been doing in the face of these very serious issues, newly minted CEO Mary Barra has addressed the issues in a new video.

2015 SEMA Show Recap | Autoblog Minute

Fri, Nov 6 2015

We take a trip to Las Vegas for a preview of the 2015 SEMA Show, the trade show for automotive aftermarket professionals and enthusiasts. Autoblog's Eddie Sabatini reports on this edition of Autoblog Minute, with commentary from Senior editor, Greg Migliore. Chevrolet Ford Honda Mazda Autoblog Minute Videos Original Video galpin

This is how GM is hiding new Chevy Volt in public

Wed, Oct 1 2014

General Motors is letting the public know that, well, it's not about to let the public know anything else about the next-generation Chevrolet Volt. But the automaker is willing to talk about its camouflaging process for upcoming versions of the extended-range plug-in. So it's a half-hearted secret, at best. GM actually has a "camouflage engineer" charged with creating ways to disguise the styling of new vehicles. In the Volt's case, the company is applying black and white swirly color patterns on top of the materials, such as plastics, vinyl and foam, that are used liberally across the body. It's all part of a teaser campaign that started last month with pictures of part the 2016 Volt. Earlier this month, GM said it was keeping track of Volt drivers' habits as it works on the next-gen model. The company noted that more than four out of five trips are being made in all-electric driving mode, and that 60 percent of Volt owners use a plain-old 100-volt outlet to recharge their cars. The car is slated to make its global debut at Detroit's North American International Auto Show next January, and the early word is that performance and all-electric range will be improved (we should hope so). The car will also be sleeker. By how much, we can't tell yet, because of those darn swirly patterns. GM's got more non-details in its press release below. Engineers charged with hiding styling while vehicle testing proceeds in public DETROIT – The styling of the next-generation Chevrolet Volt is one of the automotive world's best-kept secrets. Keeping customers and media eager to see the successor to the groundbreaking original at bay until the new Volt debuts at the North American International Auto Show in Detroit in January is tricky business. First, it is engineers, not designers, who are charged with creating camouflage that balances styling secrecy with the need to validate the Volt and its systems in public. "If it were up to me it would be a shoebox driving down the road," said Lionel Perkins, GM camouflage engineer. "The design team wants us to cover more of the vehicle and the engineering team needs to have enough of the vehicle's weight and aero exposed so that the tests in the development process are consistent with the product that will come to market." The engineers responsible for the "cool" designs covering the car might deserve style points but their efforts are intended strictly to hide the metal beneath.