2005 Chevrolet Ssr 6.0l V8,chrome Wheels Carpeted Bed W/wood Slats, Boards on 2040-cars

Auto blog

Chevrolet Colorado ZR2 concept suggests a diesel off-road future

"It takes the Colorado to a whole new place." – Mark Reuss The Chevrolet Colorado looks set to gain a more capable off-road version, with the company previewing a potential design direction with a ruggedized concept Wednesday at the Los Angeles Auto Show. Called the Colorado ZR2, the concept brings back the name used on off-road-tuned S-10 and Blazer models in the 1990s and 2000s. The ZR2 has a track that's four inches wider than the Colorado Z71, which is currently the line's most capable off-roader. The ZR2 is fitted with a new grille, power-dome hood, custom wheel flares and off-road-style fascia that reduces overhang and has flip-out aluminum tow hooks. It's all slathered in an outdoorsy hue dubbed Cyprus Green. The are electronic locking front and rear differentials, skid plates and mono-tube coilover shock absorbers. It all rolls (or crawls) on 275/65R18 off-road tires wrapped around custom 18-inch aluminum wheels. There's also a spare tire assembly mounted in the bed, which has a spray-in liner and 48-inch lift jack should things go afoul on the trail. "It takes the Colorado to a whole new place," Mark Reuss, General Motors executive vice president of global product development, said at the reveal. Power comes from the 2.8-liter Duramax diesel engine making 181 horsepower and 369 pound-feet of torque. This engine will arrive later in the year in the production Colorado. While the ZR2 remains only a concept, it suggests a new path for the Colorado – one we hope Chevy decides to take. Chevrolet Introduces Colorado ZR2 Concept Aggressively styled, more capable and driven by new 2.8L Duramax diesel engine LOS ANGELES – Chevrolet today introduced the Colorado ZR2 concept – a vision of how Chevrolet could take the all-new midsize truck's off-road capability to the next level. It also showcases the new 2.8L Duramax diesel engine that will arrive in the Colorado lineup later next year. The aggressively styled concept builds on the capabilities of the production Colorado Z71 and advances the legacy of Chevrolet's previous ZR2 production models. "From the bold stance to the trail-ready special equipment, the Colorado ZR2 is all about the fun of driving where the pavement ends – and doing it in characteristic Chevy style," said Tony Johnson, Colorado marketing manager.

Autoblog's guilty pleasure cars

Guilty pleasures are part of life – don't even try to pretend like you don't have one (or two, or six). In the non-automotive space, this could come down to that secret playlist in your iPhone of songs you'll only listen to when you're alone; or think of that one TV show you really do love, but won't admit to your friends. I've got plenty, and so do you. Going back to cars, here's a particularly juicy one for me: several years ago, I had a mad crush on the very last iteration of the Cadillac DTS. Oh yes, the front-wheel-drive, Northstar V8-powered sofa-on-wheels that was the last remaining shred of the elderly-swooning days of Cadillac's past. Every time I had the chance to drive one, I was secretly giddy. Don't hate me, okay? These days, the DTS is gone, but I've still got a mess of other cars that hold a special place in my heart. And in the spirit of camaraderie, I've asked my other Autoblog editors to tell me some of their guilty pleasure cars, as well – Seyth Miersma, as you can see above, has a few choice emotions to share about the Mitsubishi Lancer Evolution. Read on to find out what cars make us secretly happy. Mercedes-Benz SL65 AMG This decadent convertible is the epitome of the guilty pleasure. It's big, powerful, fairly heavy and it's richly appointed inside and out. It's a chocolate eclair with the three-pointed star on the hood. Given my druthers, I'd take the SL65 AMG, which delivers 621 horsepower and 738 pound-feet of torque. That output is borderline absurd for this laid-back convertible. I don't care. You don't need dessert. Sometimes you just crave it. The SL line is about the feel you get on the road. The roof is open. The air, sun and engine sounds all embrace you. It's the same dynamic you could have experienced in a Mercedes a century ago, yet the SL gives you the most modern of luxuries. An Airscarf feature that warms my neck and shoulders through a vent embedded in the seat? Yes, please. Sure, it's an old-guy car. Mr. Burns and Lord Grantham are probably too young and hip for an SL65. I don't care. This is my guilty pleasure. Release the hounds. – Greg Migliore Senior Editor Ford Flex I drove my first Flex in 2009 when my mother let me borrow hers for the summer while I was away at college. The incredibly spacious interior made moving twice that summer a breeze, and the 200-mile trips up north were quite comfortable.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck