2008 Chevrolet Other Pickups Laredo on 2040-cars

Auto blog

Nissan Leaf ends 2013 with best sales month ever, but can't catch Chevy Volt

Nissan and Chevrolet both ended 2013 with solid sales figures for their plug-in vehicles, the first two that were released (all the way back at the end of 2010) from major automakers. As has been the story for most of 2013, December sales for the Nissan Leaf and the Chevy Volt were roughly the same. When we left the year-to-date running tally at the end of November, the Volt was at 20,702, while the Leaf was at 20,080. As you can tell from the image above (if you've been noticing the trend in these EV sales monthly flash-reports), the Leaf outsold the Volt, but was it enough to put the Nissan on top for the year? In 2013, Nissan sold 22,610 Leafs, more than twice as many as in 2012. Almost. The Leaf made a valiant attempt, and did have its best month ever with 2,529 units sold. That means that for 2013, Nissan moved a total of 22,610 Leafs, more than twice as many as in 2012 (that year, Nissan sold only 9,819 Leafs in the US) and actually more than 2012 and 2011 Leaf sales combined (which was 19,493). Nissan continues to see the effects of its price drop and expanded sales areas, with Georgia rapidly becoming a Leaf hotbed. Nissan's Paige Presley said that Atlanta was once again the Leaf's number one market and that, "sales are expanding deeper into Georgia markets such as Macon and Columbus." The Volt saw a boost upwards from a November slump and sold 2,392 units in December. That puts the plug-in hybrid's annual total at 23,094, just down from the 23,461 sold in 2012. For all of 2013, though, the Volt outsold the Leaf by 484 vehicles. In a competition like this, we'll count that as a win for both sides. We will our more detailed monthly green car sales report, which covers more of the fuel efficient vehicles on the market, up soon. News Source: GM, Nissan Green Chevrolet Nissan Electric Hybrid PHEV ev sales hybrid sales

NHTSA closes 4-year GM investigation, issues common sense advisory [w/video]

Since January 2011, the National Highway Traffic Safety Administration has been investigating a possible problem with corroding brake lines in General Motors' GMT800-platform models, like the Chevrolet Silverado and Suburban and GMC Sierra, in states with salt on their roads in the winter. However, as opposed to launching a full recall of millions of vehicles, the government is issuing a common-sense safety advisory to all drivers in snowy states to keep their vehicle's undercarriage clean. It even has a video explaining things. "Older-model vehicles, often driven in harsh conditions, are subject to corrosion over long periods of time, and we need owners to be vigilant about ensuring they, their passengers, and others on the roads are safe," said NHTSA Administrator Mark Rosekind in the announcement of the end of the investigation. The agency was clear in its report that "brake line corrosion seen in the GM vehicles was not unique," and the government "has not identified a defect that would initiate a recall order." Instead NHTSA is advising drivers, especially those of vehicles from before 2007, to wash their vehicle's undercarriage in the winter and spring to remove salt or other de-icing chemicals. It also recommends regular checks by a mechanic to make sure everything is in proper order. According to the investigation documents, for just the GMT800 platform models, NHTSA found 3,645 complaints of brake line corrosion, which included allegations of 107 crashes and 40 injuries. The issue was found to be more common in vehicles over 10 years old. GM has released a statement (embedded below) that the company "supports the consumer advisory from NHTSA urging regular maintenance and care of brake lines on older vehicles." NHTSA Closes Investigation into Brake-Line Failures NHTSA 13-15 Thursday, April 9, 2015 Agency issues safety advisory on preventing undercarriage corrosion WASHINGTON – The Department of Transportation's National Highway Traffic Safety Administration (NHTSA) today issued a Safety Advisory and consumer video encouraging owners of model year 2007 and older trucks, SUVs and passenger cars to inspect brake lines and thoroughly wash the underside of their vehicles to remove corrosive salt after the long winter in order to prevent brake-line failures that increase the risk of a crash.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.