1946 Chev 1/2 Ton Pickup Truck on 2040-cars
Hamel, Minnesota, United States
Vehicle Title:Clear
Mileage: 101,010
Make: Chevrolet
Exterior Color: Blue
Model: Other Pickups
Interior Color: black/white
Trim: standard
Number of Cylinders: 6
Drive Type: Original
This listing is for my 1946 Chevrolet pickup truck, 1/2 ton. It's in excellent, basically original, condition. It's a 6 cylinder, 3-speed transmission. It starts and runs well, seems to hold good oil pressure too. It's unrestored, has been painted at some time in its history. It's been converted to 12 volt from the original 6 volt, starts right up easily. Has all glass in it, windshield does need replacing - crack on one side, discolorations on the other. Tires are good, battery is good, body is good. Fenders are really good - best I've ever seen on one of these. Hood is straight, doors are clean and straight, box is ok for a driver but would need work for show - does have some extra holes drilled here and there plus small dents. Tailgate is solid but dented - replacements are reasonable. Brakes could use some work, they do lose fluid over time. Last owner said it tends to overheat but I've not driven it enough to tell, I've driven it around the neighborhood without problem but haven't hit the highways with it due to brakes.
I think it's a nice old truck, probably nearly completely solid - I don't see any rust or rust hole repairs, cab floor is excellent too. I suppose some pinholes could show up if it were sandblasted but right now it looks very, very solid. It's not from the Midwest but not sure where it's from.
If you ever wanted a nice clean truck to either drive as is with minimal work or to restore, this may be one of the best you could find! If you want to see it for personal inspection, that would be fine.
It was purchased to do a full body-off restoration, I've done several others like this one and this is definitely the best I've had for a starting point, but I purchased a 1929 car and have decided to restore that instead. Parts for these are readily available, I've been using Jim Carter's truck parts and definitely have been pleased.
Truck can be stored for 30 days after auction if paid in full, shipping arrangements completely up to the buyer, I'm not a dealer, just a hobbyist that enjoys new projects.
Actual mileage unknown but the ebay listing format requires a number so I entered an arbitrary number, not actual mileage.
Paint is quite faded and does have some peeling and blisters, still looks somewhat presentable though!
Chevrolet Other Pickups for Sale
1959 chevy chevrolet pickup chopped top tilt bed custom show winner!!
1954 chevrolet 3100 pickup
Moving art custom on chevy pick up(US $500,000.00)
1955 chevrolet second series truck. p/s 4 wheel disc brakes, air conditioning!
1981 chevrolet luv 2wd diesel 5 spd a/c solid truck
Beautiful apache 10 stepside pickup
Auto Services in Minnesota
T K Automotive ★★★★★
Steve`s Alignment Service ★★★★★
St. Paul Automotive ★★★★★
R.B. Auto ★★★★★
R & S Automotive ★★★★★
Napa Auto Parts - Genuine Parts Company ★★★★★
Auto blog
Nissan recalls 3.5 million vehicles over airbag sensor
Sat, Apr 30 2016Nissan is recalling 3.53 million vehicles globally – 3.2 million in the United States – because the front passenger airbag may or may not deploy properly in the event of a crash. In affected vehicles, the occupant sensing system may not properly register a person sitting in the passenger seat. Passenger-side airbags in roughly 622,000 Nissan Sentra models built between 2013 and 2016 may deploy in crashes when they shouldn't, such as when a child is in the seat. 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, and LEAF, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles suffer from the opposite problem. In those models, the airbag may not deploy when it is supposed to. Nissan is aware of at least three crashes where airbags in one of the above models did not function properly, resulting in "moderate injuries." There have already been four recalls since 2013 for similar issues in Nissan vehicles. If you own one of these cars, expect a letter from Nissan in short order (or from GM if you own a Chevy City Express). Related Video: RECALL Subject : Passenger Air Bag may not Deploy due to OCS Error , 1 INVESTIGATION(S) Report Receipt Date: APR 26, 2016 NHTSA Campaign Number: 16V244000 Component(s): AIR BAGS Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF and Sentra, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash. CONSEQUENCE: If the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury. REMEDY: Nissan will notify their owners. Chevrolet City Express owners will be notified by General Motors.
We really want to use an eCrate to restomod an old GM car. Here's what we'd build
Fri, Oct 30 2020You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff. This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries. So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason. 1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.  1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.
2014 Chevrolet Corvette C7 Convertible offers a few more views before reveal
Mon, 04 Mar 2013Over the weekend, Chevrolet released its first images of the new 2014 Corvette Stingray Convertible. Now, ahead of the droptop's official introduction tomorrow at the Geneva Motor Show, the automaker has given us a few more shots of the softop C7 showing off the car's rump albeit from a high, strategically positioned angle.
From this angle, it's hard to get a sense for how long and flat the decklid really is, but we can easily see that, like the rest of the C7's design, the new convertible's decklid and tonneau cover are far more detailed than the current car. We also get a better look at the rear haunches sans brake vents, which have apparently been moved to underneath the car in order to accommodate the top's hard cover.
As for the overall styling of the C7 convertible, with the top erected, we get some idea of what a coupe design (as opposed to the Stingray's fastback shape) would look like on this car. The C5 Corvette most recently had a coupe model that did away with the large glass hatchback, and we recently reported on a low-cost "coupe" model potentially being added to the C7's repertoire.