1941 Chevy Pickup Street Rod on 2040-cars

Auto blog

Opel pulls out of Russia, GM to focus on Cadillac, 'iconic' Chevys

General Motors is going to realign its priorities in the struggling Russian marketplace, withdrawing its Opel brand and pulling out mainstream Chevrolet models. Instead, the General will take aim at Russia's well-established oligarchy, pushing Cadillac as well as "iconic" Chevrolet models, like the Corvette, Camaro and Tahoe. "This change in our business model in Russia is part of our global strategy to ensure long-term sustainability in markets where we operate," GM president Dan Ammann said in a statement. "This decision avoids significant investment into a market that has very challenging long-term prospects." Russian customers interested in an Opel or mainstream Chevys like the Spark, Aveo (the US market Sonic), Cobalt (shown above), Cruze, Orlando and the like have until December to snap up a car before the brands are pulled. "We do not have the appropriate localization level for important vehicles built in Russia and the market environment does not justify a major investment to further localize." Opel Group CEO Karl-Thomas Neumann said. GM will continue to offer service to customers in Russia. "We can assure our customers that we will continue to provide warranty, parts and services for their Chevrolet and Opel vehicles," Neumann said. Beyond realigning its brands in Russia, GM also announced that it would also be idling the company's factory in the country's second-largest city, St. Petersburg. This is the second time the St. Petersburg factory has been in the news – GM announced that it'd be idled for roughly two months back in February. Scroll down for the official press release from GM. GM to Change Business Model in Russia 2015-03-18 Focus on Cadillac and iconic Chevrolet vehicles Wind down Opel brand and sale of mainstream Chevrolet cars Idle GM Auto manufacturing facility in St. Petersburg Part of GM's strategy to ensure long-term sustainability in global markets DETROIT – General Motors today announced plans to change its business model in Russia. GM will focus on the premium segment of the Russian market with Cadillac and U.S.-built iconic Chevrolet products such as the Corvette, Camaro and Tahoe. The Chevrolet brand will minimize its presence in Russia and the Opel brand will leave the market by December 2015. "This change in our business model in Russia is part of our global strategy to ensure long-term sustainability in markets where we operate," said GM President Dan Ammann.

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.