"no Reserve" 1956 Chevy 5400 "low Cab Over" Custom Rat Rod Truck! on 2040-cars
Portland, Oregon, United States
1956 Chevy 5400 "Low cab over"Custom NO RESERVE! If you win the bid you will be taking it home! I am selling my 1956 Chevy 5400 Custom. The gentleman that I bought the truck from did all the custom work. The Truck used to be a flat bed at about 30' long. He chopped it down and put a new drive line in. Built a custom 10 gauge steel truck bed. The truck has its original 283 motor. I am not sure the original miles on the truck because the gauge is newer. I was planning on putting a 383 stroker motor in but got too busy with life. The body is grinded down to bare metal and then clear coated. There is a sunroof also cut in. The sunroof has a tonno like cover. The interior is laced with cowhide. I bought some matching rims to put on the front axles but have not put them on yet. I also have the original dually rims and tires for the back. The truck is bad@ss and gets allot of attention. The truck is very intimidating and has a Mad Max look. I love this truck but want to find a new toy. Good luck and have fun. I hope this truck finds a good home. |
Chevrolet Other Pickups for Sale
1948 chevy 1500 custom truck w/ tons of mods 355 v-8 chopped/shaved/smoothed(US $29,900.00)
1953 chevy 6500 x53t flatbed truck solid frame runs no reserve
1950 chevrolet 5 window deluxe--maching numbers--orginal !
1952 chevrolet 6400 2 ton truck w/ hydraulic dump
1952 chevy 5 window pick up truck very original patina style truck over 40 pics(US $9,200.00)
1955 chevy 3600 v8
Auto Services in Oregon
Woodall`s Auto Repair & Towing ★★★★★
USA Auto Glass Repair ★★★★★
Truce Auto ★★★★★
Tom`s Import Service ★★★★★
Tigard Tire & Auto Service ★★★★★
The Auto Man ★★★★★
Auto blog
Next Chevy Silverado could get this built-in tailgate step
Thu, Feb 2 2017General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:
Meet the mother-daughter team that's worked on almost every Chevy Volt
Sun, May 11 2014It's Mother's Day, and we're soft enough we love our mothers enough to share a new video from General Motors with you. In it, we meet Monique Watson (left) and Evetta Osbourne, a mother-daughter team that works at the Detroit-Hamtramck Assembly where GM makes the Chevy Volt (along with all of GM's other plug-in hybrids: the Opel Ampera, Holden Volt and Cadillac ELR). The two work side-by-side and have installed the lithium-ion battery pack on almost all of those vehicles - nearly 80,000 of them - since GM started making the pre-production Volts in 2009. In a prepared statement, Watson said that she likes working next to her mom, day in and day out, and they the two are totally in sync when it comes to putting the 400-pound, 16.5-kWh packs into the vehicle undersides. They two can also share stories throughout the day, and Watson said, "The arrangement has absolutely improved our relationship." Osborne started working at Detroit-Hamtramck in 1999, Watson since 2006. If you're driving a Volt today, you probably have them to thank for doing a bit of the work putting your car together. See a short video of them in action below. It's Always Mother's Day for Detroit-Hamtramck Duo Mother, daughter install lithium-ion battery pack in nearly all GM electric vehicles 2014-05-08 DETROIT – For Detroit resident Evetta Osborne, every day is Mother's Day. That's because she literally works side by side with her daughter, Monique Watson, at General Motors' Detroit-Hamtramck assembly plant. They have installed the lithium-ion battery pack on nearly every Chevrolet Volt, Opel Ampera, Holden Volt, and Cadillac ELR since production began. In fact, apart from vacation days and an occasional sick day, the mother-daughter duo has installed almost every battery pack since the Volt was in pre-production in 2009. The ELR launched earlier this year. All told – including Ampera – that's more than 80,000 electric vehicles. "We're a good team and our relationship is secondary when it comes to performing our jobs – but it's great to work alongside my daughter, said Osborne, a mother of five. Because the battery packs weigh more than 400 pounds each, automatic guided vehicles – robotic carts that use sensors to follow a path through the plant – deliver them just as the vehicle body structures glide into position overhead. The carts then lift the T-shaped packs, and Osborne and Watson guide them into the chassis and secure each one with 24 fasteners.
Why the Corvette is Chevrolet's billion-dollar baby
Thu, 28 Feb 2013Edmunds has worked up a piece that tries to figure out just how much the global Chevrolet Corvette economy is worth, a spitballed guesstimate putting the number at more than $2.5 billion with the proviso that the number is probably low. It starts by taking Corvette's new car sales of 14,132 units last year, which would equate to $714,725,900 (including destination) assuming ever car sold was a base coupe with no options. In the final tally, a little extra padding gets that number up to $750,000,000.
But that's not all. Consider this: Many of the almost 1.4 million Corvettes produced over the model's history are still on the road. There are new parts being produced and aftermarket companies like Mid-America Motorworks deaing business, that single Illinois company doing more than $40 million a year in sales. There are the Corvette events large and small, restorers who do nothing but Corvettes, salvage yards that deal only in used Corvette parts and the Corvette magazines where owners find all this stuff.
And then there are the Corvette-themed tchotchkes, every single one of which provides a tiny contribution to the huge licensing royalties that General Motors collects every year. The article admits there's no way to come to an accurate number, but it just goes to show how valuable one specific model can be to a company.