1970 Chevrolet Nova Supersport 396 Replica With 47k Orig.miles! on 2040-cars

Auto blog

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

2016 Chevy Volt will have more EV range, bigger battery

Meet the new Volt, not the same as the old Volt. That appears to be the story when General Motors introduces the 2016 Chevy Volt at the Detroit Auto Show in January. Today we're getting some more details on the guts of the new plug-in hybrid, and it turns out they're going to be much improved from the current Volt, which first went on sale at the end of 2010. Sure, the first-gen Volt did get some improvements along the way (a slightly larger battery pack, lane departure warnings) but the new Volt – which will go on sale in the second half of 2015 – marks the first time GM has been able to return to the drawing board and really make the improvements that its customers want. That's how Larry Nitz, GM's executive director of vehicle electrification explained it to AutoblogGreen today when explaining the all-new Voltec extended range electric vehicle (EREV) powertrain. "In the Gen 2 is we gave the engine a little more power, a little more torque, a little more displacement, more capability." – Larry Nitz Nitz said that the new Volt will be better in almost every sense: a bigger battery, longer EV-only range, 20 percent better acceleration in the low speed range and higher overall efficiency. This is due, in part, to the Volt's two motors being able to both act as generators and power the car. As we noted this morning, the 2016 Volt will use a larger, 1.5-liter four-cylinder engine, a version of which is already used in the Chinese-market Cruze. Nitz said that this has a number of benefits, including more power and quieter operation. "Some people would say, why did you make [the first-gen engine] so big. I would say, why did you make it so small?" he said. "It works good, our customers love it, but the reality is that if you go a little bit off and use the car a little harder, you can get the engine to need to operate at a higher speed. In an EV, that's quite noticeable. So, what we did in the Gen 2 is we gave the engine a little more power, a little more torque, a little more displacement, more capability and what it has marginally enabled is not only is it more efficient but it's also quieter." Nitz wouldn't talk about how the new powertrain might affect the two other products that use the Volt's underpinnings – the Cadillac ELR and the Opel Ampera – but if you've got a quieter option, we assume that's something ELR drivers would enjoy. But that's a story for another day.