1969 Chevrolet Nova on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

GM's European Opel division may eventually go all-electric

General Motors' Opel division in Europe may transform itself into an all-electric vehicle maker by 2030. Granted, a lot can happen between now and then, including a potential buyout by French automaker PSA Group. Regardless, Opel appears to view its electric future beyond the Ampera-e, which is the sister vehicle to the Chevrolet Bolt, and more like Tesla. Opel CEO Karl-Thomas Neumann indicated that focusing on electric drivetrains would be a superior strategy to expanding its EV technology while pushing forward with conventional drivetrains, says Automotive News Europe, citing comments Neumann made to German publication Manager Magazin. General Motors could make the decision to move towards an all-electric vehicle line for Opel as soon as May. Of course, that depends on whether Opel is bought out by PSA, the parent country to Peugeot and Citroen. PSA is in talks to buy General Motors' Opel and Vauxhall divisions, though government and labor representatives in Germany have expressed concerns over potential job losses from the proposed buyout, Reuters says. Regardless, GM has hinted at expanding its electric-vehicle line far beyond the Bolt, which has a 238-mile single-charge range and debuted late last year. Mary Barra, in an interview with CNET, said the Bolt's all-electric platform could be applied to a "huge range of vehicles," though wasn't specific about additional EV models. Opel first showed off its Ampera-e at the Paris Motor Show last fall. The name of the model raised some eyebrows because the Ampera badge had been previously used by Opel for the sister version of the Chevrolet Volt extended-range plug-in. Either way, Opel is looking to take on Renault for electric-vehicle sales supremacy across the Pond. Related Video:

Watch the National Corvette Museum sinkhole being filled in by R/C cars

Okay, so not exactly cars, but Bobcats - but still quite cool. You might remember that the National Corvette Museum had that little divot that needed to be filled in. Turns out the construction firm of Scott, Murphy & Daniel doing the work is using two remote-controlled Bobcats to fill the sinkhole with "manufactured sand," which in this case is crushed limestone. It appears that the Bobcat company has offered remote operation since at least 2007 via a wireless transmitter that works up to 1,500 feet away. So yes, that means two SMD employees stand on the edge of the pit and flick joystick levers for hours at a time, one in charge of a Bobcat with a roller-compactor attachment, the other in charge of a Bobcat with a bucket. And that, to us, is a pretty good way to earn the daily bread. Check out the video above for the latest sinkhole update. News Source: National Corvette Museum via YouTube Auto News Weird Car News Chevrolet GM Videos rc car remote control National Corvette Museum bobcat ncm