1987 Monte Carlo In Mint Condition on 2040-cars

Auto blog

EcoCar3 will convert Camaro to bitchin' eco rides

In the 47-year-history of the Chevrolet Camaro, there have been countless college-age kids spending a ton of time getting under the hood and souping 'em up. Now, General Motors is adding a twist to the concept by donating 16 Camaros for the EcoCar challenge that puts university teams together to wring out better fuel-efficiency out of various vehicles. No word on whether there will be donuts on anyone's lawn, as suggested by 80's punks the Dead Milkmen, but the idea's never a bad one. EcoCar3 will feature 16 teams such as Arizona State, Penn State, Ontario's University of Waterloo and, of course, Detroit's Wayne State University. They'll spend the next four years "[reducing] environmental impact, while maintaining the muscle and performance expected from this iconic American car," as the EcoCar organizers say. The goal is to maintain body design and safety standards while boosting efficiency and lowering emissions, but the actual process is far more complicated than that description suggests. The California Air Resources Board (CARB) and Bosch are among the sponsors of the contest, which is also put on by the US Department of Energy and managed by Argonne National Laboratory. Penn State won Year Two of the three-year EcoCar 2 competition with its E85 plug-in hybrid electric vehicle converted out of a Chevy Malibu. The grand-prize winner of EcoCar2 will be announced in June. Check out the EcoCar3 website and see the announcement video below for more details. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Who sold the most heavy-duty pickups in 2012? PickupTrucks.com investigates

Domestic manufacturers enjoyed a good year for heavy-duty pickup sales in 2012. PickupTrucks.com has taken a close look at exactly how those sales broke down between each manufacturer and between three-quarter and one-ton pickups. Ford sold some 67,786 F-250 Super Duty models last year with the Chevrolet Silverado 2500 HD falling just behind at 56,359 units. The Ram 2500 HD came in third at 41,918, while the GMC Sierra 2500 HD earned itself fourth place with 27,616 deliveries. While Ford held onto the top spot in the one-ton market, Ram easily nailed down second place by selling more 3500 HD models last year than General Motors sold Silverado 3500 HD and Sierra 3500 HD trucks combined.
So, did GM manage to sell more trucks than Ford with its two brands? Very nearly. Ford sold a total of 119,338 heavy-duty pickups to GM's 111,555. Ram, meanwhile, moved a distant 77,583. But perhaps more interesting is the diesel take rate in this segment. PickupTrucks.com says 80 percent of all domestic one-ton trucks roll from the dealer lot with a turbo-diesel under the hood. Head over to the site for a closer look at the breakdown.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging