2013 Chevy Malibu Eco Blk On Blk Rear Cam Alloys 13k Mi Texas Direct Auto on 2040-cars

Auto blog

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

2020 Chevy Trax and Buick Encore spied testing

We just recently saw a little crossover SUV from General Motors being tested, and we weren't positive what brand it belonged to. We narrowed it down to Chevy or GMC, but we're feeling more confident that it's a GMC now, since both the next generation Chevy Trax and Buick Encore subcompact crossover SUVs have been spied testing together. Of the two, the Chevy has the more radically different sheet metal. It ditches the somewhat frumpy, lumpy shape of the current Trax for a body inspired by the bigger Chevy Blazer. The roofline has sharp corners, and the hood is wide and flat. The front fascia, though obscured, shows the most connection to the bigger crossover. It has the same split headlight configuration, and it looks as though the grille takes up a sizable section of the fascia. View 7 Photos The Buick Encore on the other hand looks evolutionary in design. The body still has plenty of curves, and the distinctive, sharply rising window sill are all hallmarks of the current Encore design. The headlights and grille are similar, too, though the grille appears to be slightly updated to fit in with the Enclave and Regal. It's understandable that Buick might want to play it safe with the new Encore, since the model is Buick's best seller, selling about 23,000 units in the last quarter, nearly twice that of the next best performer, the Enclave. Since this is the first time we've seen these little crossovers, we expect it will still be a year or two before we get to see them fully revealed. They will probably continue to use small-displacement turbocharged four-cylinder engines with either front- or all-wheel drive. Related Video:

This is how GM is hiding new Chevy Volt in public

General Motors is letting the public know that, well, it's not about to let the public know anything else about the next-generation Chevrolet Volt. But the automaker is willing to talk about its camouflaging process for upcoming versions of the extended-range plug-in. So it's a half-hearted secret, at best. GM actually has a "camouflage engineer" charged with creating ways to disguise the styling of new vehicles. In the Volt's case, the company is applying black and white swirly color patterns on top of the materials, such as plastics, vinyl and foam, that are used liberally across the body. It's all part of a teaser campaign that started last month with pictures of part the 2016 Volt. Earlier this month, GM said it was keeping track of Volt drivers' habits as it works on the next-gen model. The company noted that more than four out of five trips are being made in all-electric driving mode, and that 60 percent of Volt owners use a plain-old 100-volt outlet to recharge their cars. The car is slated to make its global debut at Detroit's North American International Auto Show next January, and the early word is that performance and all-electric range will be improved (we should hope so). The car will also be sleeker. By how much, we can't tell yet, because of those darn swirly patterns. GM's got more non-details in its press release below. Engineers charged with hiding styling while vehicle testing proceeds in public DETROIT – The styling of the next-generation Chevrolet Volt is one of the automotive world's best-kept secrets. Keeping customers and media eager to see the successor to the groundbreaking original at bay until the new Volt debuts at the North American International Auto Show in Detroit in January is tricky business. First, it is engineers, not designers, who are charged with creating camouflage that balances styling secrecy with the need to validate the Volt and its systems in public. "If it were up to me it would be a shoebox driving down the road," said Lionel Perkins, GM camouflage engineer. "The design team wants us to cover more of the vehicle and the engineering team needs to have enough of the vehicle's weight and aero exposed so that the tests in the development process are consistent with the product that will come to market." The engineers responsible for the "cool" designs covering the car might deserve style points but their efforts are intended strictly to hide the metal beneath.