1966 Chevrolet Impala Super Sport on 2040-cars

Auto blog

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.

Is this '47 Chevrolet a rat rod or a sports car?

These days there are plenty of vehicles that blur the conventional automotive class structures. For instance, was the Honda Crosstour a wagon or an SUV? And what exactly was the Nissan Murano CrossCabriolet? Regardless, those line-blurring cars (or trucks) are out there, and though this one didn't roll off a production line, it's still quite the automotive head-scratcher. Hailing from Missouri, this epic creation is one part mad science experiment, one part 1947 Chevrolet pickup, and one part '95 Mercury Cougar. Add it all up and you get an awesome truck-sports-car hybrid, complete with an outrageous wing and a V8 to boot. And interestingly enough, it's up for sale . RELATED: Check out this Wild-Styled Lamborghini Rat Rod So how does it all come together? According to the listing, the Chevrolet truck cab (which had previously been chopped) was sanded down to bare metal and given a thorough shellacking of clear coat. It was then melded together with the front end of a 1995 Chevrolet S10 pickup truck, and set low to the ground on Bilstein suspension drop spindles. Stance achieved. But instead of fielding an engine from either of those pickups, it pulls its heart from a 2005 Chevrolet Tahoe SUV—a big 5.3-liter V8 heart, that is. It comes backed-up to a GM Turbo 400 automatic transmission. Towards the rear however is where things get really interesting. A Copper Pearl coated tube frame chassis both attaches the rear independent suspension (a la Mercury Cougar) to the racy spoiler, as well as secures the rat rod's rear-mounted radiator, fan, and fuel tank. I'm not quite sure why, but it just looks glorious. RELATED: Reports Say Mid-Engine Corvette Will Arrive in 2018 Inside the vintage cab, the Chevrolet furthers its racing proclivities (it's said to have won burnout and auto-cross events) with a pair of harnessed racing seats, a drift brake, a detachable steering wheel, and a tachometer with oil and temperature gauges, but oddly no speedometer. The shifter is a crescent wrench. And its shift boot? That's a Crown Royal Purple bag. All in all, this grin-worthy Frankenstein creation tallies up bits and pieces from four different vehicles (five if you include the Camaro wheels), which make it truly a mash-up of epic proportions. Internet, what do you think? Related Video: This article by Zach Doell originally appeared on Boldride. Design/Style Chevrolet Mercury Auctions Coupe Special and Limited Editions Classics eBay rat rod