11 Chev Express 3500 Extended Cargo - One Owner Florida Van - Power Equipped on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Amelia Island 2013: Chevrolet Corvette Sting Ray from concepts to split windows

While this year marks 60 years of the Chevrolet Corvette, the 2013 Amelia Island Concours d'Elegance focused on one of the coupe's most sought after models, the 1963 Sting Ray. General Motors design boss Ed Welburn was on hand to show off the all-new C7 Corvette, but even the hard-edged styling of the 2014 Stingray couldn't take away from the beautiful 1963 models sitting out on the field.
In addition to the original Sting Ray and the 1959 Sting Ray Concept, some of the other classic 'Vettes included "Big Tank" racecars, an interesting cutaway coupe, a right-hand-drive Z06 and the attention-grabbing 1963 Corvette Rondine by Pininfarina. Another impressive Corvette was the 1964 Corvette XP-819 rear-engine prototype. Owner Mike Yager had the car finished as a driving chassis for this year's show, but promises the car will be back to its original glory in time for next year's event.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.