1964 Chevrolet El Camino 283ci 4bbl Factory 4 Speed Rare on 2040-cars

Auto blog

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

Dale Earnhardt, Jr. puts his Callaway Corvette and '55 Chevy on eBay

Dale Earnhardt, Jr. has put a couple of his personal cars up for sale on eBay. The first is a 1955 Chevy Bel Air that Junior had reworked by Funkmaster Flex, a bit of a diversion from Flex's more common Ford efforts. Junior's ride has a replacement chassis from Jim Meyer Racing, a 434 small-block tuned by Sharioff Racing to 500 horsepower, and truly thin rubber on what appear to be aluminum billet rims with Junior's former number 8 on the center caps. The interior is all custom and painted to match the outside, and those seats have been completely reupholstered. The second car is a 1999 Callaway C12, the 18th of 19 C12s built that year and featured in a 2002 issue of AutoWeek. It joined Earnhardt's private collection in 2004. Built on the base of a C5 Chevrolet Corvette and using a lot of technical know-how from Callaway's European racing program, the BMW #287 Blue Pearl C12 had its V8 bored out to 6.2 liters and graced with Callaway's Supernatural upgrade; it also has a Callaway coil-over suspension with adjustable dampers. There's new bodywork all around, and when new it cost about $200,000. At the time of writing bidding on the Bel Air was up to $80,100, the C12 was at $63,100. The auction ends Monday morning, and the winning bidders have the option of having their prizes autographed and retrieving the keys from Dale Jr himself if they're willing to go to Moorseville, NC. Featured Gallery Dale Earnhardt Jr. '55 Chevy Bel-Air View 28 Photos Related Gallery Dale Earnhardt Jr. Callaway C12 View 24 Photos News Source: Dale Earnhardt Jr via eBay [1], [2] Aftermarket Celebrities Chevrolet Auctions Coupe Luxury Special and Limited Editions Performance Classics eBay callaway callaway corvette Chevy Bel Air