2lt 1.4l Bluetooth 1.4 Liter Inline 4 Cylinder Dohc Engine 138 Hp Horsepower on 2040-cars

Auto blog

Recharge Wrap-up: Range-extended EV taxis in London, 2016 Chevy Volt interior two years old

The first Metrocab range-extended EV taxis are operating on the streets of London. The cabs use a 12.2-kWh battery and two 50-kW motors, as well as a 1.0-liter gasoline range extender. Fuel economy is 98 MPGe on the ECE101 cycle, and total driving range is over 348 miles before needing to charge or refuel. Cabbies can expect to save GBP20 to GBP40 (about $30 to $60) per day on average. "The cash savings on fuel are significant, the ride and comfort outstanding, and my first customers are thrilled with the new cab," says the first operator of the new EV taxi, Preston Morris. "With its air suspension providing unrivaled comfort, panoramic glass roof for views of the city and silent powertrain, what's not to like?" Read more in the press release below. Chevrolet has had the interior design of the 2016 Volt finished for two years already, according to GM interior designer John McDougall. Beginning around 2010, GM received sketches from designers worldwide before narrowing it down to a handful of designs. Then the top three choices were molded from clay. The chosen theme was then refined for up to 18 months. "Every little thing you can imagine goes into that," says McDougall. "The glare angle from the windows, the placement of the controls, the placement of the seat. You have to create something that's beautiful and functional." Read more at GM Authority and at Inside EVs. More details have emerged about the Second Life Batteries Alliance. Vattenfall has announced a research project in partnership with BMW and Bosch to use retired EV batteries for stationary, grid-connected energy storage in Hamburg, Germany. Over 100 lithium-ion batteries from BMW i3 and ActiveE vehicles will make up a two-mWh storage unit for grid balancing, enough to power 30 four-person households for a week. The system is "compact enough to fit in a small building," says Bosch. Such storage systems are especially fit for storing and moving alternative forms of energy, which often fluctuate in supply more than electricity from a traditional power plant. Vattenhall will operate the storage unit for 10 years, with Bosch managing the batteries, during which time the three partners hope to learn more about battery applications and their performance over time. Read more at Green Car Congress, or in the press release below.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

GM profit dips on truck changeover, but beats estimates

DETROIT — General Motors on Thursday reported a higher-than-expected quarterly profit despite a drop in production of high-margin pickup trucks, as it gears up for new models that are expected to boost profits next year. Like rivals Ford and Fiat Chrysler Automobiles, GM is banking on highly-profitable Chevy Silverado and GMC Sierra pickup trucks to lift profits, as consumers shift away from traditional passenger cars in favor of these larger, more comfortable trucks, SUVs and crossovers. During the first quarter, the process of changing over to GM's new pickups resulted in a drop in production of 47,000 units. GM Chief Financial Officer Chuck Stevens said the production drop had resulted in a drop in pre-tax profit of up to $800 million. Earlier this year, GM said its 2018 profits would be flat compared with 2017, but expected its all-new pickup trucks would boost margins starting in 2019. On Thursday, GM reiterated its full-year 2018 forecast for adjusted earnings in a range from $6.30 to $6.60 per share. The automaker said capital expenditures were more than $500 million higher in the quarter because of investments its new pickup trucks and a family of low-cost vehicles under development with Chinese partner SAIC Motor Corp. On Wednesday, rival Ford said it would stop investing in most traditional passenger sedans in North America. CFO Stevens told reporters on Thursday that GM has "already indicated that we will make significantly lower investments on a go-forward basis" in sedans. 2019 GMC Sierra View 21 Photos GM benefited from a lower effective tax rate in the quarter, but adjusted pre-tax margin fell to 7.2 percent from 9.5 percent a year earlier. Stevens said the company's profit margin should hit 10 percent or higher in the second quarter and for the full year. GM said material costs were $700 million higher in the first quarter, and it expects those costs to continue rising. The automaker said it would counter those increases with cost cutting measures. "It is a more difficult environment than it was three or four months ago," Stevens said when asked about rising commodity prices from potential steel and aluminum tariffs announced by the Trump administration. "But we are confident we can continue to offset that." The company reported quarterly net income of $1.05 billion or $1.43 per share, a drop of nearly 60 percent from $2.61 billion or $1.75 per share a year earlier. Analysts had on average expected earnings per share of $1.24.