2014 Chevrolet Cruze 1lt on 2040-cars

Auto blog

CNG-powered Chevy Sonic, Cruze headed your way

The value proposition for a Crazy Diamond Performance CNG ride was a little bit better before gas prices took a dive in the past month. Still, the Michigan-based company, which converts some of Chevrolet's compact vehicles to run on compressed natural gas, received approval late last month from the US Environmental Protection Agency (EPA) for two of its conversion models. And CNG is still pretty cheap. Crazy Diamond will start selling CNG versions of both the Chevrolet Cruze and Chevrolet Sonic. The startup will target fleet operators looking to cut both refueling costs and their carbon footprint. CNG can be found in much of the country in the low $2 range, while the average CO2 emissions are about 25 percent less than those of similar gas-powered vehicles. Average gas prices have tumbled by more than 30 cents a gallon in the last month, according to AAA, but they're still at close to $3. The two models will be able to go almost 300 miles on a full tank of CNG. Crazy Diamond said this summer that it would start selling converted a CNG-powered Cruze that delivers 130 horsepower for as low as $26,000. The turbocharged version goes for about $28,000. Take a look at Crazy Diamond Performance's celebratory press release below. Crazy Diamond Performance recieves EPA approval on its CNG Cruze and Sonic CDP receives EPA approval for its Mono-Fuel CNG Cruze and Sonic. Shelby Township, Michigan, October 30, 2014– Crazy Diamond Performance (CDP) receives EPA approval on its Mono-Fuel Compressed Natural Gas (CNG) Chevrolet Cruze and Chevrolet Sonic. Crazy Diamond Performance has received EPA approval on two new mono-fuel small passenger vehicles, the CNG Chevrolet Cruze and CNG Chevrolet Sonic. These new mono-fuel CNG platforms are the first of a series of small and fuel efficient vehicles coming from CDP, where cost, low emissions and reduced fuel consumption is important for not only fleet owners, but to the general public as well. "Soon to be available, are the 1.8L and 1.4L Cruze and Sonic CNG retrofit systems. These two vehicles represent a change in the status quo, with an OEM level integration of the fuel system and its components" states Michelle Fern, Executive Vice President CDP Inc. These vehicles provide flexibility for fleets looking to purchase a domestic small mono-fuel passenger sedan, but have not had an option until now. There are significant emissions benefits over its gasoline counterpart, with an average reduction in Carbon Dioxide (CO2) of 25%.

Chevy's low-cost pedestrian avoidance to debut on 2016 Malibu

The mainstreaming of safety technologies that began on luxury vehicles will get a big boost from General Motors later this year. The General says it plans to offer 22 driver assistance systems across its product portfolio of 2016 models, starting with the redesigned Chevrolet Malibu - the one that we know will keep tabs on teenagers for the benefit of parents. Pedestrian avoidance will be another of its available options. Instead of kitting the sedan out with numerous and expensive radar arrays, the GM system uses the camera mounted next to the rearview mirror that is already used for the lane-keeping function. New software lets it detect pedestrians, and when it detects a potential collision with one, it can alert the driver and brake autonomously if the driver doesn't react. Eventually, engineers want to give it the ability to do the same with cyclists. Because it uses existing hardware updated with new code, GM says the application costs "a few hundred dollars." GM demonstrated the Front Pedestrian Braking preventing a crash with a dummy pedestrian at speeds up to 15 miles per hour. Automotive News reports that it will reduce the severity of impact up to 40 miles per hour, but "may not be of much use in collisions at higher speeds." That feature will also join the options list of the Cadillac CT6. The press release below has more on GM's driver tech soon on the way. Related Video: GM Paving Way to Smarter and Safer Driving at All-New Active Safety Test Area 22 crash-avoidance technologies offered on 2016 Chevrolet, Buick, GMC and Cadillac models MILFORD, Mich. 2015-07-24 – Chevrolet, Buick, GMC and Cadillac will offer 22 different active safety technologies across their 2016 model year U.S. lineups, ranging from driver alerts to those that automatically intervene and assist the driver in critical situations. Safety engineers will develop and test these and other safety technologies for products around the world at GM's new, 52-acre Active Safety Test Area at its Milford Proving Ground near Detroit. The $14 million facility officially opened Friday. "Our comprehensive safety strategy of helping customers before, during and after a crash continues," said Jeff Boyer, vice president of GM Global Vehicle Safety.

Chevy to resume engine-building program for 2015 Corvette Z06

One of Chevrolet's most popular and unique customer features is set to return for 2015, as the company has announced that the Engine Build Experience is back. Interested owners will be able to screw together their engines beginning in March. The $5,000 option (which does not include the cost of travel) will give future owners of the 2015 Corvette Z06 the chance to screw together their car's actual 6.2-liter, supercharged V8. Available on each of the Z06's three trims, the Engine Build Experience includes a day at the Performance Build Center, instruction from an engine assembly tech, photographs of the experience and a personalized engine plaque. Once the build process is completed, the engine will (eventually) be fitted under the hood of the customer's personal Z06. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," Corvette product manager Harlan Charles. "It's important for customers to understand their engine won't be installed the day after they built it. It will flow into the scheduling process for vehicle assembly, which depends on a number of logistical variables." Scroll down for the official announcement of the Z06's Engine Build Experience, available below. Exclusive Corvette Engine Build Experience Returns Program renewed for supercharged LT4 engine at new Bowling Green build center 2015-01-07 BOWLING GREEN, Ky. – Chevrolet announced today it is resuming the exclusive Engine Build Experience for Corvette Z06 customers – the only program of its kind for supercar customers. Starting in March 2015, Corvette Z06 customers will be able to assemble the 650-hp supercharged LT4 engine for their cars at the new Performance Build Center inside the Bowling Green Assembly Plant. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," said Harlan Charles, Corvette product manager. "It's a chance to bond with their new car." The Engine Build Experience is selected with order code PBC and is offered on all Z06 trim levels.