2011 Chevrolet Cruze Low Miles on 2040-cars

Auto blog

What we know, and think we know, about the 2016 Chevy Volt

With the next-gen Chevy Volt due to make an appearance at the Detroit Auto Show early next year, bits and pieces about the new car are making their way into the press. Perhaps most importantly, the new Volt is going to have better "fuel economy and efficiency," according to GM executive vice president Mark Reuss. The current Volt gets 98 MPGe and 37 miles per gallon on premium fuel. It also has a 38-mile electric-only range. We don't know how GM will improve the efficiency or to what degree, but the logical options include making the car lighter, giving it better aerodynamics and/or improving the powertrain. To that end, one of the big things we don't know for sure includes information on the new gas-powered engine. Forbes says it will be a downsized 1.0-liter, three-cylinder mill instead of the 1.4-liter, four-cylinder used in the current model, which could certainly help the car be more efficient. The new Volt is also going to have more technology, which shouldn't surprise anyone. GM is now openly talking about how it will change the way it markets the Volt, shifting away from the mass-market mentality to focus on the regions where the car is already popular. "There's a Northeast and West Coast market for Volt, and there's nothing wrong with that," Chevy chief marketing officer Tim Mahoney told Forbes. There are rumors that the new Volt will have seating for five by adding a seat in the back. This is something a lot of current Volt owners would love, but we've heard nothing official hinting that this would be the case. We expect the battery to be the new 17.1-kWh version, or maybe even have a capacity increase, so GM would have to seriously repackage the pack to eliminate the ridge that runs from between the front seats and then back to the rear two seats. If you've heard anything official, do let us know.

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck