2016 Chevrolet Corvette 3lt on 2040-cars

Auto blog

Performance cars overpower the Detroit Auto Show

At precisely the stroke of noon on Monday, the 2016 Acura NSX rolled on stage at the Detroit Auto Show amid plumes of smoke and dancing lights. The sounds of the powerful engine revving soared to the rafters. It was the second coming of Acura's iconic sports car, and the reveal had all of the expected trappings. Afterwards, champagne corks popped and the bubbly flowed. It was noon in Detroit, but for the green-car movement, it seemed like the clock had struck midnight. That's an exaggeration, but performance was the overwhelming theme of North America's most important show. Ford – which has helped lead the way in smaller displacement engines and early adoption of hybrid powertrains – had more than 1,500 horsepower on stage one point after it revealed the GT concept, the new F-150 Raptor and the Shelby Mustang GT350R. The NSX is technically a hybrid (it has three electric motors), but with 550-plus hp, there's no doubt this Acura was bred on the track. The theme continued throughout the show at nearly every stand. Alfa Romeo showed off the 4C Spider, which is the open-air version of a car that purports to be the spiritual successor of the high-performance 33 Stradale from 1967. On Tuesday, Cadillac is scheduled to reveal the 640-hp CTS-V with the V8 transplanted from the Corvette Z06, and the Lexus was expected to roll out its own V8-powered beast, the 467-hp GS F. For enthusiasts – especially enthusiasts with money – these are halcyon days. But make no mistake, all of this power has a purpose. Ford product chief Raj Nair said the Blue Oval uses high performance cars to develop technologies, like aerodynamics and materials, which are then shared across its lineup. "It's another proof point about how serious we are in developing innovation through performance," he said. Ford, which is rolling out at least 12 performance cars by 2020, said the sporty cars attract younger and more influential buyers to its fold, which can help burnish its image beyond adding sales volume. Toyota is taking a similar approach, senior vice president Bob Carter said, noting the Lexus RC coupe draws people into showrooms and gets them excited about the brand, even if they don't end up buying one. "They provide an aspiration and a halo that provides the attention that gets you noticed in a cluttered market," he said.

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

GM adds 1,200 jobs at Detroit-Hamtramck plant

General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.