2015 Chevrolet Corvette Z06 3lz Z07 8 Speed Auto on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

2014 Chevy Silverado priced from *$24,585, V8 gets better economy than Ford EcoBoost V6

Chevrolet has thrown down the next hand in the pickup truck poker wars and revealed at least a couple of potential aces - depending on which numbers matter most to you. The 2014 2014 Silverado 1500 with its 5.3-liter EcoTec3 V8 gets 335 horsepower and 383 pound-feet of torque, is mated to a six-speed automatic, can tow 11,500 pounds with the optional Max Trailer Package and costs the same as the outgoing Silverado, $24,585 (*including $995 destination fee). Chevy says the Silverado also stands atop the fuel economy charts when comparing any competitor with a V8 engine - and some competitors with V6 engines. The two-wheel drive model returns 16 miles per gallon city, 23 mpg highway, 19 mpg combined in two-wheel drive guise and 16 mpg city, 22 mpg highway and 18 mpg combined as a four-wheel drive.
For context around those numbers, the most fuel efficient V8-powered 2013 Ford F-150 pickups lose about two mpg in every metric compared to the Silverado, the 3.5-liter V6 EcoBoost returning 16 city, 18 highway and 22 combined in two-wheel drive. However, that EcoBoost does have 365 hp and 420 lb-ft of torque. You can get a Ram 1500 with a 3.6-liter V6 that gets 25 mpg highway, but it has 305 hp and 269 lb-ft of torque. The 2013 Ram with the 5.7-liter Hemi V8 and its 395 hp and 407 lb-ft drops one mpg in every category to the Silverado. Its tow rating is 200 pounds beyond its nearest competitor, the F-150 with the Max Trailer Tow Package.
Elsewhere, the new Silverado gets a quieter cab with a redesigned interior, a new bed with improved load-management possibilities, disc brakes all around, tweaked steering and suspension, along with free standard scheduled maintenance for two years or 24,000 miles.

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.