1998 Corvette Rebuildable Repairable Wrecked Project on 2040-cars

Auto blog

Here are all the cars GM is axing as part of its restructuring

GM plans to kill off a couple of great and a few meh cars as part of its restructuring. Here's a rundown of all the cars being phased out of production. None of the vehicles GM axed were SUVs or crossovers. Instead, it was an action reminiscent of what Ford recently decided to do by discontinuing U.S. sales every Blue Oval sedan. GM just didn't explicitly say, "We're killing our cars," like Ford did — probably a smart move by GM. Keep scrolling down to see the full list of deceased GM models. Chevrolet Volt This one was the most surprising of all the cars GM decided to can, primarily because cars with plugs are supposed to be our future. However, maybe consumer demand just isn't quite there yet for a plug-in like the Volt. We came up with all sorts of ideas for what was to blame for the untimely demise of the Volt, so go check that out for a full breakdown of the situation. Cadillac CT6 Here's another car we'll be sad to see go. Cadillac's flagship sedan was such a joy to drive, and it served as the conduit to deliver GM's semi-autonomous Super Cruise system, which still hasn't been surpassed by any other company's technology in our books, even Tesla's Autopilot. That being said, GM does plan to produce the CT6 until March, with the last cars coming off the line set to be twin-turbo V8 V-Series models. If it's going to go, this seems like a pretty great way to make an exit. We'll be patiently awaiting the next flagship Cadillac once this one finally fades away. Chevrolet Impala The Impala is actually a pretty good car. It doesn't sell terribly, and we think it's a completely satisfactory car to drive. However, people would rather have a Traverse or Equinox these days, making the Impala one of the vehicles to find itself on this list. Chevrolet is keeping its smaller brother, the Malibu, but a big, full-size sedan just isn't what people are ordering up these days. It's unfortunate to see it go, but we won't be broken up over it. Chevrolet Cruze We wouldn't rank the Cruze at the top of the compact car class, but if you were looking for a small, cheap American car, it was either this or the Focus. The Cruze had the potential to be a true small performance car if Chevy had ever wanted to make it into one. But sadly, we're seeing it bow out before Chevy ever tried to slot a hot engine and suspension in there to make it competitive with other hot hatches. A Cruze SS would have made enthusiasts take notice.

1956 Corvette SR-2 factory racer profiled

The Chevrolet Corvette has earned its place as America's sports car, capable of taking on the best the world can throw at it. Much of that winning reputation was earned with victories on the track. Now, there was a chance to own an early piece of the nameplate's motorsport history in the form of a 1956 Corvette SR-2 racer, but some deep pockets were necessary to get it, with an estimate of $6.885 million. The story behind the SR-2 is fascinating. In 1956, famous General Motors designer Harley Earl's son was racing in a Ferrari. Obviously, that wasn't going to work given his father's position within the automaker, and Harley and Corvette engineer Zora Arkus-Duntov got to work on a faster racecar. Three were made. This one was reportedly the first, and for 1957 it also received a fuel-injected V8 making a claimed 331 horsepower and four-speed manual gearbox, according to "Corvette Mike," the owner and seller. The SR-2 went on display in Scottsdale, AZ appropriately timed to coincide with the big Barrett-Jackson auction there that wrapped up this weekend. The car wasn't part of that event; instead marque specialist Mike Vietro sold the racer as a private treaty sale. Company spokesperson Troy Worrell told Autoblog both the bids and identities of the bidders will remain undisclosed. The video above goes into even deeper detail about this rare, finned Vette or check out the car's full description for even more info.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.