1979 Chevrolet Corvette on 2040-cars

Auto blog

Best cars for snow and ice in 2023 and 2024

What's the best car for snow? The real answer is "the one with winter tires." What do we mean by that? You could have the finest, most advanced all-wheel-drive system or four-wheel drive in the world, but if you're running all-seasons (the spork of tires), your fancy four-wheeler won't matter much. The odds are, any vehicle on the road running good winter tires will probably perform adequately in slippery, slushy and/or snowy road conditions. (Here's a more complete explanation of why winter tires are totally worth it). In other words, you don't really need any of the cars on this list. With a set of winter tires, countless others will do the job, and even these will be at their best with proper rubber. You can find a variety of winter tires for your car here at Tire Rack. Keep in mind that you will need a full set of four snow tires for safety and performance, no matter what you're driving. The days of your dad putting just two snows on the family truckster to get it moving in a straight line are long gone. Don't get us wrong, getting a car that performs well in snow and ice is still a worthy criteria for car buyers. According to the U.S. Transportation Department, 70% of Americans live in places that get snow and ice. And much of the country has been blasted with arctic air for much of the new year. So let's look at the cars. First, we're highlighting choices for a variety of buyers and price points. Second, we're not just considering snow; we're considering general wintery conditions people will experience driving to work or school. As such, these are all choices with advanced all-wheel-drive systems, usually with "torque-vectoring" systems that not only automatically shunt power front and back, but side to side between the rear axles. Most have extra ground clearance for getting through deep snow, and we prefer those vehicles with more responsive steering, throttles and transmissions that provide a greater sense of vehicle control in slippery conditions.    Acura RDX Read our Acura RDX Review Acura's Super-Handling All-Wheel Drive system was one of the first to offer torque-vectoring, and besides often being touted for its ability to greatly enhanced dry-road handling, its benefits in the slick stuff can be profound. It's actually surprising that Acura hasn't leaned into this capability further by offering more rugged versions of its vehicles.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.