2006 Chevrolet Cobalt Lt Coupe on 2040-cars

Auto blog

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.

GM reworking mandatory OnStar plans for some 2024 models

For the 2023 model year, GM added its OnStar and Connected Services plan as standard equipment to a large number of Buick, GMC, and Chevrolet vehicles. Folding the $1,500 retail price into the MSRPs of models like the GMC Acadia and Buick Encore plumped up prices beyond the usual year-on-year bumps. Looks like there's a reversal in play for 2024, GM Authority reporting that many of the models fitted with OnStar and Connected Services — now called OnStar Premium — will step down to three years of OnStar Remote Access standard.   OnStar Remote Access comes with these features: Remote key fob, vehicle locate, and remote personalization through mobile and in-vehicle apps. Three additional features can be added to the plan: OnStar Guardian, in-vehicle hotspot, and Super Cruise. Owners can also upgrade to OnStar Premium if they choose.  Higher trims like Buick's Avenir and GMC's Denali, plus the GMC Hummer and the Cadillac Escalade will retain OnStar Premium as standard equipment. That suite starts with Remote Access and adds: Automatic crash response, stolen vehicle assistance and recovery, OnStar Guardian, in-vehicle app access, unlimited streaming, three years of Super Cruise on vehicles with the hardware, and six months of SiriusXM radio. The Escalade puts a cherry on top with three years Sirius XM instead of six months. The Remote Access plan normally charges $14.99 per month. We're not sure yet if GM will subtract the cost of OnStar Premium from the MSRP and add the $540 for OnStar Remote Access, or if the trial period comes free of charge. Even if that's what happens, the change could take nearly $1,000 off the MSRP of a car like the GMC Acadia before any 2024 increases. We'll know more as the 2024MY models roll out and prices are announced. Related Video 2022 Buick Enclave Avenir revealed

Chevy confirms 2016 Camaro will have wheels, brakes

Good news, everyone! Chevrolet has issued yet another round of teaser images and information about the sixth-generation Camaro, set to debut in Detroit on May 16. This time around, Chevy's teaser images confirm that the new car will not only have wheels and tires (Goodyear Eagle F1s, no less), but brakes as well. On top of that, we now know that the new Camaro will be 28-percent stiffer than the outgoing model. "The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly," GM said in a press release, which you can read below. We've already learned that the new coupe will be 200 pounds lighter than its predecessor, has a bunch of unique parts, and according to GM's Mark Reuss, will outperform the Ford Mustang in every way. Now, it's only a matter of time before we see the sixth-gen Camaro, but surely not before Chevy issues even more teasers and information. Related Video: 2016 Camaro is Stronger, Lighter and More Responsive Computer aided engineering contributes to 28 percent greater structural stiffness DETROIT – The engineering team spent 9 million hours of computational time honing the driving experience of the all-new 2016 Chevrolet Camaro before the first prototype turned a wheel. The structural modeling led to the Gen 6 Camaro being 28 percent stiffer than the current model. "The modeling abilities of computer aided engineering are advancing at incredible rates," said Jim Karlavage, Camaro program engineering manager. "Today, we can accurately model opportunities to add torsional strength without adding unnecessary mass. The result is a lighter, stiffer structure that benefits every aspect of the driving experience." The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly. "The structural weight savings are compounded by opportunities to reduce un-sprung weight," said Karlavage.