Frame Off Built Chevelle Ss Convertible Zz502 5 Speed on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Train derailment leaves Jeep, GMC, Chevy pickups damaged in Nevada

An unfortunate train derailment is causing some inevitable delays for pickup truck customers west of Nevada. Yesterday morning, 33 train cars derailed in Lincoln County, and the cargo that was being transported consisted of new Jeep Gladiators and Wranglers along with Chevrolet Silverados and GMC Sierras, judging from the photos released by the Lincoln County Sheriff’s Office. The train derailment also caused the adjacent road to be closed, and local law enforcement recommends the area is to be avoided as long as it takes to clean it all up. In the photos, damaged Jeeps and other trucks sit either on their wheels or shiny-side-down as the incident is being assessed. Available information says there were thankfully no personal injuries, but itÂ’s not likely any of these trucks will end up in customer hands, even with a significant discount. Pre-registration transport damage, significant or not, has often resulted in scrapping complete vehicles so that manufacturers can steer clear of liability issues. Hooniverse.com, which also reported on the incident, notes a couple of interesting things. Firstly, the upended Gladiator seems to have a pretty sturdy support structure for its glasshouse, thanks to its new rollbars. Another matter is that the GM trucks, also pictured, wear discreet and temporary transport steel wheels instead of fancier items, perhaps to deter thieves eager to grab a shiny set from trucks on their way to the dealer. Still, itÂ’s a shame these vehicles could never fulfill their hauling purposes in the hands of new owners. Perhaps the manufacturers can at least use the damage for data-gathering purposes. Related Video:    

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: