1967 Chevrolet Chevelle Ls3 Pro Touring Restomod on 2040-cars
Salvisa, Kentucky, United States
1967 Chevelle LS3 Pro Touring RESTOMOD
A perfect full frame-off rotisserie restoration by Scott's Speed and Custom Shop.
This car is unbelievably powerful, handles like a track car, and is amazingly built.
The body was completely stripped to metal before body work and GM factory Tuxedo Black paint was sprayed.
Glass finish with shaved drip rails, smoothed firewall, with car underside painted in matching black.
Custom chassis fabricated by Scott's Custom Speed and Design Shop. Fully powder coated frame.
Build features include:
6.2 LS3 Motor - less than 400 miles
Custom engine bay - super clean and mirror perfect paint on firewall
6L90E transmission with GM electronic sequential shifter - amazing ability to control shifting
Eddie Motor Sports Custom Hood and Trunk hinges
Eddie Motorsports door sill plates in matte black
Vintage Air system runs ice cold
Chris Alston G-Machine suspension kit
Chris Alston G-Machine coil over shocks
Boze forged aluminum rims - one off made to order with perfect fitment.
19 inch wheels in front - 20 inch wheels in rear
New Michelin tires
Momo racing steering wheel
Street Legal Performance (SLP) Fuel Rail covers
Custom 4 core radiator
Wilwood Brake master cylinder and hydro boost
Kore 3 C6 Z06 disc brakes with 13" DBA rotors on all 4 corners
3.73 gear with Eaton Posi traction
New 12 Bolt Rear End
Chevrolet Chevelle for Sale
- 1966 chevrolet chevelle ss(US $14,950.00)
- 1970 chevrolet chevelle ss(US $17,100.00)
- 1969 chevrolet chevelle ss 396(US $14,820.00)
- 1967 chevrolet chevelle 300(US $14,170.00)
- 1967 chevrolet chevelle(US $19,600.00)
- 1969 chevrolet chevelle ss(US $18,800.00)
Auto Services in Kentucky
Tri-State International Trucks ★★★★★
South Louisville Paint & Body Shop ★★★★★
Singletary Automotive ★★★★★
Roppel`s Auto Service Centers ★★★★★
Raymond`s Wrecker Service ★★★★★
R B & S Automotive ★★★★★
Auto blog
Chevy Colorado, GMC Canyon get updated tachometers due to graphical error
Sun, Feb 8 2015After James Bearing bought a Chevrolet Colorado, he noticed a discrepancy between the truck's spec sheet and the truck's tachometer: Chevrolet said 3.6-liter V6 in the little pickup produces 305 horsepower at 6,800 rpm, but the the tachometer indicates a redline at 6,500 rpm. So either he wasn't making as much power as he was promised, or the tachometer display was incorrect. Bearing said he asked Chevy about it but got no response. Until now. A General Motors spokesman said the rev limiter is indeed set for 6,800 rpm, but the tach graphics "are slightly off" in the Colorado and the GMC Canyon, and submitted an SAE horsepower certification to back him up. If you're wondering how such a thing got past quality control... well, let's just say you're not alone. GM is going to fix "the graphics on future trucks," which makes it sound like Bearing will just have to learn to live with the indicated redline he's got. He could always pretend he's driving a sleeper, with four more ponies waiting to be unlocked in the danger zone for those who dare. Related Video: Featured Gallery 2015 Chevrolet Colorado: First Drive View 38 Photos Related Gallery 2015 GMC Canyon: Quick Spin View 27 Photos News Source: Auto Guide Auto News Chevrolet GM GMC Truck gmc canyon
GM recalling 250,000 SUVs over door electronics
Mon, 20 Aug 2012After a door-fire investigation that dates back to February, the National Highway Traffic Safety Administration has officially announced a recall today that affects around 250,000 General Motors SUVs for a faulty driver's door module. The recall applies to the Buick Rainier, Chevrolet Trailblazer, GMC Envoy, Isuzu Ascender and Saab 9-7X from the 2006 and 2007 model years, as well as the 2006 Chevrolet Trailblazer EXT and GMC Envoy XL for vehicles sold and/or registered in the Snow Belt.
Road salt use in these midwestern and northern states can lead to corrosion of the driver's door module on these GMT360 and GMT370 vehicles, which allows water to come in contact with the circuit board. If shorted out, the vehicle's power door locks and power windows will not work, and could possibly lead to overheating and, in some circumstances, a fire. No official word on how many total vehicles caught on fire, but back in June, 28 fires had been reported to the government agency. A fix for the problem is still being worked out, but all affected vehicle owners will be notified by GM.
Scroll down for the official NHTSA statement.
A conversation with GM's Mark Reuss on MPG, aluminum and Corvettes
Wed, Feb 19 2014There was plenty to talk about when General Motors hosted its annual mid-December holiday media reception a few months ago. GM had just decided to pull its global Chevrolet brand out of major European markets, where Chevys have competed directly with GM Europe Opel and Vauxhall vehicles, and the US government had sold its last remaining shares of GM stock. But most important was the company's just-reshuffled leadership. Post-bankruptcy CEO Dan Akerson had announced that he would step aside and that 52-year-old Mary Barra would replace him on January 15. Not only would she be the first woman to lead a major automaker, she would also be GM's first engineer CEO since Bob Stempel in the early 1990s. "I look at 2013 and 2014, as the retooling of General Motors" - Mark Reuss Replacing her as executive VP for global product development (and purchasing and supply chain) would be 49-year-old Mark Reuss, who had served a stellar four years as North American president, and elevated to corporate president (from executive VP and CFO) would be 42-year-old Dan Amman. All three are relatively young auto enthusiasts who are liked and respected inside and outside the company, and their collective talents and experience are highly complementary. I've interviewed Barra and found her smart, personable and knowledgeable, though she carefully walks the corporate line in speaking and answering questions. I met and chatted with Ammann for the first time at that holiday reception, and he made a good first impression. But I've known Reuss for some time as a genuinely good guy and a highly capable and inspiring leader, and I believe he is exactly the right person for the global product responsibility once famously held by the outspoken, oft-controversial Bob Lutz. So I jumped at an opportunity to join a group interview of Reuss (with mostly business reporters) at the Detroit Auto Show in January. It was an interesting session of mostly good questions, which he answered with refreshing candor and humor. "I look at 2013 and 2014, as the retooling of General Motors," Reuss said. "We've taken down almost every plant in North America, converted and turned it this last year, and to do that with award-winning vehicles and pretty flawless launches is key. We have to keep the train rolling on great product, because the rest won't happen without the best product, period." A reporter asked whether GM was pushing big trucks, SUVs and Corvettes again because gas is cheap. "No," Reuss said.