1966 Chevrolet Chevelle Pro-touring on 2040-cars

Auto blog

Jay Leno gets pulled over while roaring in a Corvette Z06 convertible

No one is above the law, even if that person is a certain silver-haired auto enthusiast with a popular weekly video series about the cars in his garage. This week, Jay Leno experiences the 2015 Chevrolet Corvette Stingray Z06, but he also gets to have a meeting with some of California's Finest immediately after a high-speed blast. As opposed to the full-bore Z06 coupe with the seven-speed manual, Leno gets behind the wheel of the slightly heavier convertible version with the eight-speed auto. Being a droptop doesn't bother him too much, but Leno makes it obvious he wishes that he could be shifting for himself. Even if the auto is technically quicker, Leno says that swapping gears gives him something to do while driving. Of course, one of the major advantages of the convertible is the ability to listen to the Z06's thumping V8 unimpeded. With 650 horsepower and 650 pound-feet of torque from 6.2-liters of supercharged muscle, it already puts down impressive numbers, but the sound might just be the best part of all. Around town, the 'Vette is quiet enough to easily blend in with the rest of traffic. However, tip the throttle down and the valves in the exhaust open up to turn the engine into roaring monster. Be careful where you make this thing howl, though, because it's pretty easy for the police to take notice. The host finds that out the hard way in this week's episode of Jay Leno's Garage. Related Gallery 2015 Chevrolet Corvette Z06 Convertible View 18 Photos News Source: Jay Leno's Garage via YouTube Celebrities Chevrolet Coupe Performance Videos Jay Lenos Garage chevy corvette stingray chevy corvette z06

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Bob Lutz builds the case for a mid-engined Corvette

Rumors of a mid-engine Corvette are like automotive industry folklore at this point. Every once in a while, news pops up that it might be happening or is under development, but nothing actually ever comes to fruition as something people can actually buy. The latest spy shots strongly suggest a mid-engine 'Vette is in the cards, yet again, possibly for 2018. Now, an op ed by former General Motors executive (and definite performance car fan) Bob Lutz in Road & Track gives the inside scoop on the history of one of these proposals and lays out how to make it happen today. According to Lutz, the company's engineers believed the C6 ZR1 was at the limit for front-engine, rear-wheel drive performance in that package, and the only solution was to move the powerplant behind the driver. Lutz even got then CEO Rick Wagoner on board. The scheme made it at least as far as clay models for mid-engine versions of the 'Vette and Cadillac XLR. Eventually, a lack of money got in the way, though, bringing the project to an end. Lutz puts a lot of faith in GM's current leaders, especially Mary Barra and Mark Reuss. He thinks the chances of a mid-engine 'Vette happening this time are better than 50 percent. The model, rumored to be named Zora, could offer over 700 horsepower in an ultra lightweight body and be priced at about $120,000 to "suck the doors off everybody." Head over to Road & Track to get some insights from this highly respected and entertaining auto industry veteran. Related Video: