1966 Chevelle Custom Protour Autocross Or Show on 2040-cars
Overland Park, Kansas, United States
Body Type:Coupe
Engine:327
Vehicle Title:Clear
Interior Color: Black
Make: Chevrolet
Number of Cylinders: 8
Model: Chevelle
Trim: Malibu
Drive Type: RWD
Power Options: Air Conditioning
Mileage: 500
Warranty: Vehicle does NOT have an existing warranty
Exterior Color: Custom
I bought this car in 2006 and have spared no expense in building it over the last seven years. The previous owner drug it out of an 18 year barn stint and then decided he didn’t have the means to get it back on the road. I built it intending to take it on the Hot Rod PowerTour and do some auto-crossing but it’s never done either due to my lack of time. I think it’s time that someone else enjoy it instead of having it covered up in my garage. It is a 136 VIN car and was originally a Malibu Sport Coupe with a 327, Powerglide automatic transmission, manual steering and drum brakes all around. Below is a fairly complete list of what I’ve done to it but I probably missed a few things. If you have any questions or want to see the car let me know. Drivetrain: -1966 dated 327 -less than 500 miles on rebuild -New -Crane cam -Edelbrock intake and Carb -March Performance “Ultra” serpentine kit -MSD HEI distributor -Aluminum radiator and electric fan from -Long tube headers and 2.5” exhaust -4 Speed with new -Original 10 bolt rear end with 308 gears -Cleaned, professionally painted and rebuilt -Auburn Posi unit -Cast finned rear cover -New gas tank, sending unit, fuel pump and fuel line -New water pump, power steering pump and alternator Frame/Suspension: -Frame boxed and powder coated -4-wheel power disc brakes with all new steel brake lines -Quick Ratio Power steering with all new ends and linkage -Tubular control arms front and rear -Adjustable coilover Progressive shocks front -1.5” lowered coilsprings in rear -Hotchkis sway bars front and rear -American Racing Hopster chrome wheels -17”x7” front -18”x10” rear with custom offset for this car -BFGoodrich G-force T/A KDW’s Body: -Full body off rotisserie restoration -New floors, rockers, rear window valance and front quarter patches -Underside completely POR coated prior to being painted -Smoothed firewall -Rear wheel wells lengthened and widened -Quarter panel lips rolled and wheels have never touched them -All new rubber seals and weather-stripping throughout -Paint completed May 2010 -Two tone paint -Black top and charcoal bottom only visible in direct sunlight -Professionally re-polished and waxed this year for the first time -All new trim -New window trim buffed and professionally painted -Late model GM door handles and mirrors -Shaved drip rails -Goodmark 2” Steel cowl hood -Original bumpers re-chromed Interior: -All new from headliner to carpet -Custom dash with Dakota Digital instruments -Original non-AC dash replaced by factory AC dash from donor car -Ash tray and original vent control panel cut out and filled in with metal -Custom Vintage Air controller built into dash -Custom made radio delete panel -Digital clock installed in the console -All American new electrical throughout -Original(?) tilt steering column -Vintage Air heat and AC unit -Hushmat in headliner, doors and floors -Custom truck carpet and side panels made to match interior appearance -Panels are removable Car will come with a 3 ring binder full of all documents and receipts from the build.
Buy is responsible for all shipping charges. I am willing to help with a local delivery. Car is listed for sale locally so auction may be ended early. |
Chevrolet Chevelle for Sale
1964 chevelle 300 wagon ss el camino completely restored turn key(US $19,500.00)
1966 chevelle ss396(US $18,500.00)
1967 chevelle chevy 350(US $10,400.00)
1972 chevy chevelle ps pdb factory ac 350 4 speed see video great driver
1972 chevy chevelle big block automatic pdb ps buckets console must see l@@k
1972 chevelle ss 454 with w code in vin number car with original crw 454 block(US $6,900.00)
Auto Services in Kansas
Ward`s Mobile Mechanics ★★★★★
V Werks ★★★★★
Terry`s Auto Sales & Salvage ★★★★★
Sutton-Kauffman Transmission ★★★★★
Showroom Automotive ★★★★★
Riley`s Rescue ★★★★★
Auto blog
A conversation with GM's Mark Reuss on MPG, aluminum and Corvettes
Wed, Feb 19 2014There was plenty to talk about when General Motors hosted its annual mid-December holiday media reception a few months ago. GM had just decided to pull its global Chevrolet brand out of major European markets, where Chevys have competed directly with GM Europe Opel and Vauxhall vehicles, and the US government had sold its last remaining shares of GM stock. But most important was the company's just-reshuffled leadership. Post-bankruptcy CEO Dan Akerson had announced that he would step aside and that 52-year-old Mary Barra would replace him on January 15. Not only would she be the first woman to lead a major automaker, she would also be GM's first engineer CEO since Bob Stempel in the early 1990s. "I look at 2013 and 2014, as the retooling of General Motors" - Mark Reuss Replacing her as executive VP for global product development (and purchasing and supply chain) would be 49-year-old Mark Reuss, who had served a stellar four years as North American president, and elevated to corporate president (from executive VP and CFO) would be 42-year-old Dan Amman. All three are relatively young auto enthusiasts who are liked and respected inside and outside the company, and their collective talents and experience are highly complementary. I've interviewed Barra and found her smart, personable and knowledgeable, though she carefully walks the corporate line in speaking and answering questions. I met and chatted with Ammann for the first time at that holiday reception, and he made a good first impression. But I've known Reuss for some time as a genuinely good guy and a highly capable and inspiring leader, and I believe he is exactly the right person for the global product responsibility once famously held by the outspoken, oft-controversial Bob Lutz. So I jumped at an opportunity to join a group interview of Reuss (with mostly business reporters) at the Detroit Auto Show in January. It was an interesting session of mostly good questions, which he answered with refreshing candor and humor. "I look at 2013 and 2014, as the retooling of General Motors," Reuss said. "We've taken down almost every plant in North America, converted and turned it this last year, and to do that with award-winning vehicles and pretty flawless launches is key. We have to keep the train rolling on great product, because the rest won't happen without the best product, period." A reporter asked whether GM was pushing big trucks, SUVs and Corvettes again because gas is cheap. "No," Reuss said.
GM recalls trucks and SUVs for brake pedal problem
Thu, Feb 11 2016The Basics: General Motors will recall over 473,000 North American examples of the 2015-2016 Chevrolet Silverado HD, GMC Sierra HD, and police pursuit versions of the Chevy Tahoe. These include 426,573 vehicles in the US and 46,837 in Canada, according to Reuters. The Problem: The brake pivot nut can loosen over time, which can render the pedal inoperative. This would be a danger to drivers trying to stop the vehicles. In some cases, the "Service Engine Soon" light might come on. Injuries/Deaths: None reported. The Fix: Dealers will inspect the pivot bolt, and if necessary they will apply adhesive to it and reinstall the part with increased torque. If You Own One: "We expect to start customer notifications shortly," GM spokesperson Tom Wilkinson told Autoblog. Related Video: Transport Canada Recall # 2016053 Recall Date 2016/02/04 Notification Type Safety Mfr System Brakes Manufacturer Recall Number 20760 Units Affected The number of vehicles or components affected by the recall. 46,837 Category Light Truck & Van, SUV Recall Details On certain Heavy Duty and Police Pursuit vehicles, the brake pedal pivot nut may become loose, causing the brake pedal to be loose or inoperative. If the brake pedal becomes loose or inoperative, it could interfere with the accelerator pedal, and/or the driver may be unable to safely stop the vehicle through application of the brake pedal, potentially affecting stopping distances and increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the pivot bolt installation to determine whether the vehicle has already received the production remedy. If not, the dealer will add adhesive to the nut, and reinstall the nut at an increased torque. Note: This condition may result in the "Service Engine Soon" light illuminating, and brake lights may stay on longer than expected. Make Model Model Year(s) Affected CHEVROLET SILVERADO 2015 2016 CHEVROLET TAHOE POLICE PURSUIT VEHICLE 2015 2016 GMC SIERRA 2015 2016
This is your 2014 Chevrolet SS
Sat, 16 Feb 2013Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.
2040Cars.com © 2012-2025. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.038 s, 7841 u