1980 Chevrolet Truck 4x4 Special Sport Edition on 2040-cars
Saint Albans, West Virginia, United States
This truck was purchased new for our 18 year old son in 1980 , he passed away in 1982. We drove the truck on occasion until 1990. We quit driving it and did a complete restoration on it mechainly and body wise and completely new interior. with guanine GM parts. This truck has 51,291 miles on it. The truck has been garage kept in a heated and air conditioning since being restored. This truck is a 350 V8 with 350 turbo transmission, air conditioning, cruise and tilt wheel. It has heavy duty spray in bed liner, twin gas tanks, Lund Sun Visior. Stripes are copy of original when purchased new, AM/FM/CD radio, colth seats and carpets.
|
Chevrolet C/K Pickup 1500 for Sale
4 x 4 loaded dump bed new paint(US $14,900.00)
1987 chevrolet silverado 1500 k10 4x4 no reserve auction
1992 ss 454 truck with upgrades and custom paint , hotrod,(US $7,000.00)
1986 chevy 4x4 lifted truck registered as an antique runs good located delaware(US $5,500.00)
Rare!!! original!!!!! 1977 chevrolet 4x4 shortbox silverado(US $13,500.00)
Removable hardtop convertible, low miles 5 speed v6, good condition, no reserve
Auto Services in West Virginia
Valley Collision Repair Inc ★★★★★
S & M Auto Repair ★★★★★
Ohio Valley Tire ★★★★★
I-77 Ford ★★★★★
Felouzis Auto Repair ★★★★★
Atkins Transmission & Auto ★★★★★
Auto blog
GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]
Mon, Oct 19 2015UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.
Experimental mid-engine XP-819 Corvette going up for auction
Sun, 17 Feb 2013It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.
GM throttles back Chevy Malibu, Buick LaCrosse production over swollen inventories
Wed, 06 Feb 2013As inventory of the Chevrolet Malibu and Buick LaCrosse continues to pile up, General Motors will be idling its Fairfax Assembly Plant for two weeks, according to Automotive News. This move comes about a month after the plant was shut down for three weeks in late December and early January for the same reason. As of January 31, the GM had a 94-day supply of Malibu stock while the LaCrosse was a little worse with a 117-day supply.
Just last week, GM announced that it would be investing $600 million in upgrading this plant, but it's unclear what future plans the company has in store for Fairfax considering slow sales of both the plant's models. We do expect a refreshed and more luxurious LaCrosse shortly and an early design update for the Malibu to be announced at some point this year, although we have had no official word as to when either will happen.