Chevy C10 Fully Restored Custom Lowered 20" Rims 454 on 2040-cars
Sherman Oaks, California, United States
Body Type:Pickup Truck
Engine:V8 454 cubic in
Vehicle Title:Clear
For Sale By:Private Seller
Mileage: 0
Make: Chevrolet
Model: C-10
Trim: Custom
Cab Type (For Trucks Only): Regular Cab
Drive Type: RWD
FULLY RESTORED 1963 CHEVROLET C-10
IF YOU DON'T LIKE BEING COMPLEMENTED AND GIVEN THE THUMBS UP ALL THE TIME THEN THIS IS NOT THE TRUCK FOR YOU!
Let's start off with the heart and soul of this bad a** truck - it has a 7.4L 454 cubic inch engine with headers and dual exhaust. I would estimate the horsepower to be in the 450 range. It is loud as can be and rumbles like a beast. The engine starts up on first try as it should. I wouldn't be hesitant to drive the truck on a 500+ mile road trip.
It is matched to a 3 speed auto transmission with a B & M shifter. The gears shift smoothly as they should without any issues. It has freeway gears so you can cruise on the freeway without wasting a ton of gas at high RPM'S.
I recently upgraded the radiator to an aluminum one with new thermostat and built in transmission cooler. The truck runs around 180-190 degrees which is exactly where it should be.
The paint is in good driver condition and looks really good but it is NOT show quality if it was I'd be asking for over 35k for this truck (which I'm no where near). RUST FREE!
The bed has been professionally rhino lined which looks really good - throw anything in there without worries of destroying the bed. The rear tailgate has been welded and shaved flush to make it 1 piece (see pictures). I think it looks great this way. It gives it a clean flush design. The tailgate does not open any longer (but it is an easy conversion if you wanted to do so). There are some small paint cracks in this area (see pictures).
There is power steering and power disc front brakes.
I just installed a brand new front disc kit by McGaughy with a new master booster w/ proportioning valve. There is less then 250 Miles on these brakes. The truck stops perfectly.
The truck is lowered on Hotchkis suspension (4" in the front and 6" in the rear). This is also brand new with less then 250 miles on the suspension. It rides smooth without any rubbing or bumping. It makes the truck look and ride amazing.
All the window and glass seals along with the weatherstripping have been replaced everywhere. So there is no cracking anywhere on the trim giving it a clean new look.
The front wraparound windshield is new as well. These 1963's are rare because of that wraparound design. It also has the rare BIG WINDOW for back which is also rare - most of these were the small windows that in my opinion don't look that great.
There is a new grey carpet kit and newly upholstered vinyl black front bench seat and matching sun visors.
The gauges are autometer and they all are working/functioning properly.
It has brand new rims and tires all around which look amazing on this truck. 20" Chrome Foose rims (20x10 in the rear and 20x8.5 in the front). The tires are Hankook (275/35/20 rear and 245/40/20 front).
All the door hinges, locks, strikers, window regulators, and hardware have been replaced as well.
Basically this truck needs absolutely nothing to be done or fixed.
If you want an investment truck to drive and have fun with and not worry about it breaking down or putting money into it then this the the right truck for you. All the work has been done for you already. Just hop in turn the key and enjoy!
I will miss this truck but I just got started on a new project which requires funds.
Please do not hesitate to call or email me with any questions. Please leave me a voice mail if I do not answer. 818-356-6788.
Clean car title in hand.
Chevrolet C-10 for Sale
- 1967 chevy c10 pickup
- 1970 c10 longbox restored *custom airbrushed paint(US $20,000.00)
- 68 chevy truck hot rod rat rod classic truck
- 1966 chevy c10. clean, original, stock 32,000 original miles everything works!
- 1970 chevy c10 step side frame off restoration(US $14,500.00)
- 1977 chevy 454 stepside pick up cumstom(US $9,500.00)
Auto Services in California
Yuba City Toyota Lincoln-Mercury ★★★★★
World Auto Body Inc ★★★★★
Wilson Way Glass ★★★★★
Willie`s Tires & Alignment ★★★★★
Wholesale Import Parts ★★★★★
Wheel Works ★★★★★
Auto blog
Editors' Picks August 2021 | Honda Civic, Mercedes S-Class and more
Thu, Sep 9 2021This month of Editors' Picks saw us award the honor to a couple of redesigned stalwarts like the Honda Civic and Mercedes-Benz S-Class. Plus, a new crossover that splits the difference between the compact and subcompact class takes home the prize. On top of this, we'll introduce you to a new term: midcompact. We'll be using this to describe those in-between crossovers that are a tad too small to be considered compact, but too large to neatly fit into the subcompact class. For a few examples of these "midcompact" cars, we'll point you to the Ford Bronco Sport, Kia Seltos and VW Seltos. In case you missed our previous Editors' Picks posts, here’s a quick refresher on whatÂ’s going on here. We rate all the new cars we drive with a 1-10 score. Cars that are exemplary in their respective segments get EditorsÂ’ Pick status. Those are the ones weÂ’d recommend to our friends, family and anybody whoÂ’s curious and asks the question. The list that youÂ’ll find below consists of every car we rated in August that earned an EditorsÂ’ Pick. 2021 Genesis G70 2022 Genesis G70 View 26 Photos Quick take: Genesis hits all the right buttons with its G70. It's attractive, fun to drive and can be had for a fair price. Enthusiasts should give it a shot before taking home one of its German competitors. Score: 8 What it competes with: Alfa Romeo Giulia, Lexus IS, Acura TLX, Infiniti Q50, Audi A4, BMW 3 Series, Mercedes-Benz C-Class, Cadillac CT4, Volvo S60 Pros: Sharp handler, stunning exterior looks, strong engines Cons: Average interior, loses manual option, small backseat and trunk From the editors: News Editor Joel Stocksdale — "I was already a big fan of the Genesis G70. It has brilliant handling, and the twin-turbo V6 is a beast. It's even a bargain against the competition. And Genesis just made it look a lot better. I wish they'd done a bit more to update the interior, but it's still not a bad cabin. Besides, you won't think too much about it when you're hustling down a fun back road." Features Editor James Riswick — "Yes, it is small, but in a sport sedan segment where "sport" means increasingly less, the G70 still delivers (in part because of that smallness).
2014 Chevy Silverado priced from *$24,585, V8 gets better economy than Ford EcoBoost V6
Mon, 01 Apr 2013Chevrolet has thrown down the next hand in the pickup truck poker wars and revealed at least a couple of potential aces - depending on which numbers matter most to you. The 2014 2014 Silverado 1500 with its 5.3-liter EcoTec3 V8 gets 335 horsepower and 383 pound-feet of torque, is mated to a six-speed automatic, can tow 11,500 pounds with the optional Max Trailer Package and costs the same as the outgoing Silverado, $24,585 (*including $995 destination fee). Chevy says the Silverado also stands atop the fuel economy charts when comparing any competitor with a V8 engine - and some competitors with V6 engines. The two-wheel drive model returns 16 miles per gallon city, 23 mpg highway, 19 mpg combined in two-wheel drive guise and 16 mpg city, 22 mpg highway and 18 mpg combined as a four-wheel drive.
For context around those numbers, the most fuel efficient V8-powered 2013 Ford F-150 pickups lose about two mpg in every metric compared to the Silverado, the 3.5-liter V6 EcoBoost returning 16 city, 18 highway and 22 combined in two-wheel drive. However, that EcoBoost does have 365 hp and 420 lb-ft of torque. You can get a Ram 1500 with a 3.6-liter V6 that gets 25 mpg highway, but it has 305 hp and 269 lb-ft of torque. The 2013 Ram with the 5.7-liter Hemi V8 and its 395 hp and 407 lb-ft drops one mpg in every category to the Silverado. Its tow rating is 200 pounds beyond its nearest competitor, the F-150 with the Max Trailer Tow Package.
Elsewhere, the new Silverado gets a quieter cab with a redesigned interior, a new bed with improved load-management possibilities, disc brakes all around, tweaked steering and suspension, along with free standard scheduled maintenance for two years or 24,000 miles.
Our favorite mid-engine Corvette theories and rumors
Tue, Sep 13 2016The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.