1972 Chevrolet C-10 Pickup Long Stepside on 2040-cars
Lake Grove, New York, United States
This is a 1972 Chevy C10 pickup 8FT stepside. It was a one person owned truck. The original owner passed away in 2006. I also have the original build sheet and manuals! He only drove it a couple thousand miles every year. The paint is original in some spots but, some spots have primer paint i guess to stop rust years ago original paint is all faded, with the right amount of patina in places. This truck is straight. It has a 6 cyl 250 cube and a 1 barrel Carb gm 102, 3 speed on the column, manual transmision. It has a little rust in the passenger side and driver bottom corners Rockers ok. Both cab corners to. There is a very small rust spot on the driver side floorboard - very minor. The truck runs very good, shifts good. It has some play in the steering box. The wood floor in the bed is good no rot, All of the wiring is in very good condition. All of the lights, horn, radio are in good, working order. The tires new 1000 miles or so. You are welcome to call with questions or to set up an appt to see it in person. Please contact Joe at 631-241-2370 anytime
Thank you and Happy Bidding! |
Chevrolet C-10 for Sale
- Chevrolet s10 pickup(US $7,000.00)
- 1965 c-10 fresh build from delmo's custom(US $45,000.00)
- Custom 1967 chevy c10 stepside pickup truck 454/400 12 bolt posi ps pdb tilt
- Incredable restored 67 chevrolet c-10 4x4 wow what and truck you must see drive
- 1966 chevy pickup hot pro rat rod
- 1966 chevrolet c10 short bed
Auto Services in New York
Zoni Customs ★★★★★
Williams Toyota Scion ★★★★★
Watertown Auto Repair Svc ★★★★★
VOS Motorsports ★★★★★
Village Automotive Center ★★★★★
V J`s Car Care ★★★★★
Auto blog
Watch how Corvette Racing's new collision-avoidance radar system works
Fri, 22 Mar 2013When it comes to technology used in racecars, we generally expect it to trickle down to production cars, not the other way around. Well, Pratt & Miller has developed a new rear-facing radar that operates in a similar fashion to what we're used to in modern blind spot detection systems, only it is also capable of tracking cars as they approach and relaying vital information to the driver via a large display screen.
The innovative radar system debuted at last weekend's 12 Hours of Sebring for Corvette Racing, and this system makes perfect sense for endurance races like this since the cars sometimes have to drive through the night and in poor weather conditions.
The radar can detect cars even with poor visibility, and uses easy-to-distinguish symbols for the driver to identify.
Motor Trend puts Chevy Camaro Z28 and Porsche 911 GT3 Head 2 Head
Mon, Dec 29 2014Motor Trend admits, "This is an unfair comparison." But that doesn't make it any less fun to watch when they pit a Camaro Z/28 against the Porsche 911 GT3. The former has a 7.0-liter V8 with 505 horsepower and 481 pound-feet of torque shifted through a six-speed manual. The latter has a 3.8-liter flat-six with 475 hp and 324 lb-ft shifted through a seven-speed dual-clutch transmission. Yet those are only the little disparities – the big disparities are mass and money: the Camaro weighs 3,882 pounds and costs $76,150 as-tested, the Porsche weighs 3,267 pounds and costs $145,785. But they're both about hardcore performance, so MT takes them out on the street, to the drag strip, to the parking lot for figure eights and a skidpad test, and finally to Big Willow for Randy Pobst to give his professional assessment. Remember when a lotta people spent a lotta time debating Pirates vs. Ninjas? This is like that, only it's the "haul-ass good-time car" vs. the "track surgeon." Enjoy the debate in the video.
GM Design shows what could have been and what might be
Thu, May 27 2021We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.      View this post on Instagram            A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.      View this post on Instagram            A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: