1972 Chevrolet C-10 on 2040-cars

Auto blog

Buick Encore, Chevy Trax earn Top Safety Pick from IIHS [w/video]

The Buick Encore has been a massive sales success practically from the moment it debuted, and Buick recently decided to increase production to keep up with demand for the premium compact crossover. The Insurance Institute for Highway Safety recently put one to the test again, and the Encore earned a Top Safety Pick award. It's the first model from the brand to score the nod since 2013, according to the IIHS, and the rating also carries over to the 2015 Chevrolet Trax. The 2015 Encore scored a Good rating in all of the IIHS' evaluations, including the 40-mile-per-hour, small overlap front crash test. That was a big improvement over the previous model the institute tested, which scored a Poor result in the overlap test. In the first test, about 13 inches of the lower door hinge pillar came into the passenger compartment, and the steering wheel airbag moved too far to protect the dummy's head. Improvements for the latest model year showed six inches of intrusion this time, and the airbags caught the dummy's head well. The dummy's sensors also indicated a low risk of injury. The two CUVs missed out on the full Top Safety Pick+ because the IIHS scored the Encore as only having a basic front crash prevention system, and there was no such equipment for the Trax. To earn the highest mark, models need at least an advanced rating by the institute for this technology. Buick Encore, Chevrolet Trax earn 2015 TOP SAFETY PICK award ARLINGTON, Va. - A small SUV is the first vehicle from the Buick brand to qualify for a TOP SAFETY PICK award from the Insurance Institute for Highway Safety since 2013. The Buick Encore's newly introduced, lower-priced twin, the Chevrolet Trax, also qualifies for the honor. The Encore's award follows improvements to the SUV's structure for better small overlap front protection. The 2015 model earns a good rating in the small overlap test. In contrast, the 2013-14 Encore rated poor in the test. The driver's space was seriously compromised with intrusion measuring as much as 13 inches at the lower door hinge pillar. The dummy's head barely contacted the front airbag before sliding off the left side, as the steering column moved to the right. The side curtain airbag deployed too late and didn't have sufficient forward coverage to protect the head. In the latest test, the driver space was maintained reasonably well, with maximum intrusion of 6 inches at the door hinge pillar and instrument panel. The dummy's movement was well-controlled.

5 classic trucks and their polarizing modern revivals

EVs are helping eliminate Detroit's gas-guzzling problem. Some revivals of gas-powered classics are getting the EV treatment.  But not every revived model looks exactly like its original counterpart. We're in a new era of hulking Detroit metal, and you can thank EVs. Americans can't get enough of their big, beefy trucks and SUVs. But for many years, some of the biggest gas guzzlers fell out of fashion as gas prices rose and emissions regulations tightened. But in the past few years, some of the most iconic American truck nameplates have been brought back to life with electric motors, like the GMC Hummer. In other cases, as with the Ford Bronco, improvements in engine technology and more interest in rugged adventure vehicles made a gas-powered revival possible. Even some revivals that started as gas-powered, like the Chevy Blazer and the Jeep Wagoneer, are now getting electrified spinoffs. (Even if they don't always look quite as sleek as their original inspiration.) Here are side-by-sides of five classic American trucks and their modern counterparts. The Jeep Wagoneer 1975 Jeep Wagoneer and 2024 Electric Jeep Wagoneer SStellantis After a long wait, Jeep released its revival of the classic Wagoneer and Grand Wagoneer in 2020. Starting later this year, an electric version of the luxury Jeep SUV will join the Wagoneer lineup. The Chevrolet Blazer A 1973 Chevrolet Blazer and a 2024 Chevrolet Blazer EVGetty Images, General Motors The Chevrolet Blazer was first rebooted in 2019 as a sporty family SUV. The modern Blazer shares zero resemblance to its boxy, off-roading older sibling, but it has still managed to become one of Chevy's more popular SUVs in recent years. The Blazer EV came later, and was one of the first models GM built on its new Ultium battery platform. The Hummer A Hummer H2 and the 2023 Hummer EV pickup truckGetty Images, General Motors Once the poster child for Detroit's big, bad gas guzzlers, the Hummer got new life as an electric pickup truck in 2021. The Ford Bronco A 1971 Ford Bronco and a 2022 Ford BroncoFord Motor Co. After a rouge group of engineers and designers inside Ford spent years trying to breathe life back into the Blue Oval's boxy off-roader, the Ford Bronco was finally resurrected in 2020 amid a rise in popularity for rugged adventure vehicles. The Ford Ranger 1985 Ford Ranger and a 2024 Ford RangerFord Motor Co.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging