Simply Beautiful Fuel Injected 1957 Chevrolet Bel Air Hardtop Coupe No Post Nice on 2040-cars

Auto blog

Chevrolet Colorado ZR2 concept suggests a diesel off-road future

"It takes the Colorado to a whole new place." – Mark Reuss The Chevrolet Colorado looks set to gain a more capable off-road version, with the company previewing a potential design direction with a ruggedized concept Wednesday at the Los Angeles Auto Show. Called the Colorado ZR2, the concept brings back the name used on off-road-tuned S-10 and Blazer models in the 1990s and 2000s. The ZR2 has a track that's four inches wider than the Colorado Z71, which is currently the line's most capable off-roader. The ZR2 is fitted with a new grille, power-dome hood, custom wheel flares and off-road-style fascia that reduces overhang and has flip-out aluminum tow hooks. It's all slathered in an outdoorsy hue dubbed Cyprus Green. The are electronic locking front and rear differentials, skid plates and mono-tube coilover shock absorbers. It all rolls (or crawls) on 275/65R18 off-road tires wrapped around custom 18-inch aluminum wheels. There's also a spare tire assembly mounted in the bed, which has a spray-in liner and 48-inch lift jack should things go afoul on the trail. "It takes the Colorado to a whole new place," Mark Reuss, General Motors executive vice president of global product development, said at the reveal. Power comes from the 2.8-liter Duramax diesel engine making 181 horsepower and 369 pound-feet of torque. This engine will arrive later in the year in the production Colorado. While the ZR2 remains only a concept, it suggests a new path for the Colorado – one we hope Chevy decides to take. Chevrolet Introduces Colorado ZR2 Concept Aggressively styled, more capable and driven by new 2.8L Duramax diesel engine LOS ANGELES – Chevrolet today introduced the Colorado ZR2 concept – a vision of how Chevrolet could take the all-new midsize truck's off-road capability to the next level. It also showcases the new 2.8L Duramax diesel engine that will arrive in the Colorado lineup later next year. The aggressively styled concept builds on the capabilities of the production Colorado Z71 and advances the legacy of Chevrolet's previous ZR2 production models. "From the bold stance to the trail-ready special equipment, the Colorado ZR2 is all about the fun of driving where the pavement ends – and doing it in characteristic Chevy style," said Tony Johnson, Colorado marketing manager.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Weekly Recap: Lincoln Continental serves up the style, Cadillac CT6 delivers the substance in New York

Lincoln and Cadillac grabbed the spotlight this week at the New York Auto Show in a dramatic fashion that evoked the brands' glory days. America's two luxury carmakers went toe-to-toe with their glittering reveals and plans for ambitious expansion. Both were selling their technology, style and the promise of a better future. Cadillac vs. Lincoln. At the Javits Center, 2015 seemed a lot like 1956. Neither company was interested in drawing comparisons with the other, which is fair, and accurate. They're in vastly different places in terms of sales and the pace of their turnarounds, but they hope to reach the same eventual destination at the pinnacle of the luxury-car world. Lincoln used the element of surprise to great effect with the Continental concept. A production version is still at least a year away, and the company was vague on details. Officially, we don't even know if it is front- or rear-wheel drive, though speculation abounds. Who cares? The seats can be adjusted 30 ways! The Continental also showed off a bold chrome grille that will be the new face of Lincoln. The blue bomber also rolled on blinged-out 21-inch polished aluminum wheels, used a 3.0-liter EcoBoost engine and had huge LED head lights with "laser-assisted" high beams. All of this resulted in almost blinding attention. The concept drew rave reviews, stirred controversy with Bentley designers who argued Lincoln ripped them off, and most importantly, pointed a way forward for the newly determined brand that hopes to compete with Mercedes, BMW, Audi, Cadillac and Lexus. View 32 Photos Meanwhile, Cadillac showed the CT6, a finished product that will top its range and is loaded with the best and latest technologies General Motors has at its disposal. With production starting late this year, Cadillac had more specifics at the ready. Engines? Cadillac has a couple V6s and a turbo four for sure. It's working on a hybrid, and has considered a V-Series variant. It's based on a new rear-wheel-drive, aluminum-intensive chassis called Omega, features an advanced collision-mitigation system with automatic braking and has a cabin that's laden with "leathers, exotic woods and carbon fiber." It will be assembled at GM's Detroit-Hamtramck factory and goes on sale next year. At this point, Cadillac is more than willing to talk about every except for the price. The devil was not in the details for Cadillac, as evidenced by the CT6. But it wasn't for Lincoln either.