1955 Chevrolet Bel Air Station Wagon *super Clean Must See!!* on 2040-cars

Auto blog

How real is the Chevy Bolt EV and will it really cost $30,000?

"This is us bragging that we can do this kind of car." That's how Michael Simcoe, GM's executive director for NA exteriors, described the Chevy Bolt EV concept, which made a surprise appearance at the Detroit Auto Show today. While there was talk of a 2017 production debut, this is for sure a concept vehicle. But that means the ideas behind the vehicle are perhaps more important than the details. For example, no one is talking about what size battery might appear in a production Bolt, but Simcoe would talk about how rapid progress in battery improvements made it possible for GM to make the bold Bolt declaration that promises 200 miles and a price tag of around $30,000 (after incentives). But if the Bolt makes it to market, it won't be until 2017 (as rumored) or later, is it really fair to promote the car as being available with a federal tax credit? For one thing, credits for plug-in vehicles may change in the next few years, but if the laws stay the same, each manufacturer is limited to 200,000 vehicles before the credits start to decline. GM is justifiably proud that it's sold over 70,000 Volts thus far, but with a new model coming out later this year and a few years to go until the Bolt potentially arrives, GM could be pushing right up against that 200,000 limit when the Bolt goes on sale. But Volt executive chief engineer Pam Fletcher told AutoblogGreen that, "We're just trying to take some of the confusion out." "Think about talking to the average consumer," she said. "First, going through the explanation of how the federal tax credit was set up, how it's being used and so on. [In the industry, we] have the luxury of understanding the nuances of that regulation, but right now people who aren't in the marketplace, they don't have the luxury of all that. It's already hard to communicate the details so we gave them data in a way that is what they're used to seeing." There was one question that drove the two-year Bolt gestation and design period, Simcoe said: What does a better battery offer a vehicle designer? "We've got a number of spaces we play in for powertrain technology and obviously electrification is one of them," he said. "With Volt 1 and then the Spark EV, with that development and batteries getting better for us, we started doing some practical packaging to deliver a vehicle which was not the traditional aero form which you see around electric vehicles.

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

GM recalls 3.8 million vehicles in North America due to braking issue

WASHINGTON — General Motors Co said Wednesday it was recalling 3.46 million U.S. pickup trucks and SUVs to address a vacuum pump issue that could make braking more difficult and that has been linked to 113 accidents and 13 injuries. The recall covers 2014-2018 model year vehicles, including some Cadillac Escalade, Chevrolet Silverado, Chevrolet Tahoe, GMC Sierra, Chevrolet Suburban and GMC Yukon vehicles. In late June, GM recalled 310,000 vehicles in Canada for the same issue. GM did not immediately explain why the Canadian recall occurred more than two months before it called back the vehicles in the United States. The recall was triggered because the amount of vacuum created by the vacuum pump may decrease over time, GM told the National Highway Traffic Safety Administration (NHTSA) in documents posted on Wednesday. The NHTSA opened a preliminary investigation into the issue last November, and said it had reports of nine related crashes and two injuries. It provided GM in July with additional field reports that prompted the automaker to open an investigation. GM said it could affect braking in "rare circumstances." The NHTSA said in a statement the "vehicles may experience brake boost failure, which would require increased brake pedal effort, leading to a hard brake pedal feel, and potentially increased stopping distance." GM said dealers will reprogram the electronic brake control module to improve how the system utilizes the hydraulic brake boost assist function when vacuum assist is depleted. GM said the vacuum assist pump, which is lubricated with engine oil that flows into the pump through a filter screen, can in some cases lose effectiveness over time, as debris such as oil sludge can accumulate on the filter screen. GM told NHTSA that prior model years used a different brake assist system design, and vehicles manufactured after 2018 were not equipped with the affected pump design. Separately, GM said on Wednesday it is recalling 270,000 additional U.S. vehicles in three smaller recalls, including 177,000 2018 Chevrolet Malibu cars with 1.5L turbo engines because an error in the engine control module software may result in the fuel injectors being disabled.