Originally rebuilt 8 years ago as a stock 1952 Pickup with a 216 cu in engine ,than 4 years ago Hot Rodded it . has a 400 cu in Mopar 1975 engine bored 30 over ,has a Lunati flat tappet cam ,and a Holly 750 vac secondary carb on a AL high rise manafold, 727 rebuilt trans with a shift kit and heavy duty clutches also has a Ford 9 inch with Posi and 4.11 gears mounted on a 4 link suspension with coilovers .

I did all the work on her except the machine work on the engine was done by Micron ,and the interer was done by a local guy,Paint was done by 1st Ave auto body .

Pinstripping was done by a local shop ,old time pin stripper,

Had the frame sandblasted and than I painted with Chassie Saver one coat of silver primer and 2 coats of mate Black than 2 coats of Rust oleum black .

The front has 70s Chevy disc brakes conversion and 2 port master cly.Rear is Ford 11in drum.

Tail lights I built from 300 cu in GMC pistons

Tilt steering all gauges

Front wheels are 14in rears are 15

I have the front and rear finders and the front inner fenders the fenders were on the truck and match the rest of the truck.

There is some damage on the drivers side door a motorcycle fell on it and scraped the paint and pin stripping