2005 Cadillac Sts V6 Clean Carfax Florida Car Heated Seats 3.6l Bose Sunroof on 2040-cars

Auto blog

GM may kill 6 car models as it works with UAW to tackle sales slump

The president of the United Auto Workers union said on Thursday the union is talking with General Motors about the potential threat to plants and jobs from slumping U.S. car sales. GM's response will be more trucks and SUVs, and sources say at least six slow-selling car models may be killed off. "We are talking to (GM) right now about the products that they currently have" at underused car plants such as Hamtramck in Michigan and Lordstown in Ohio, and whether they might be replaced with newer, more popular vehicles such as crossovers, Dennis Williams told reporters. "We are tracking it (and) we are addressing it," Williams added. GM has cut shifts at several U.S. plants this year as inventories of unsold cars have ballooned. Industry analysts said more jobs could be at risk as the automaker wrestles with permanently shrinking production of small and midsized sedans. GM is reviewing whether to cancel at least six passenger cars in the U.S. market after 2020, including the Chevrolet Volt hybrid, which could be replaced in 2022 with a new gasoline-electric crossover model, Reuters has learned from people familiar with the plans. Other GM cars at risk include the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala and Chevrolet Sonic, sources said. Some analysts have singled out GM's Hamtramck plant in Detroit as one of the most vulnerable because of plummeting car sales. The plant, which opened in 1985, builds four slow-selling models: Buick LaCrosse, Chevrolet Impala, Cadillac CT6 and Chevrolet Volt. In the first half, it built fewer than 35,000 cars, down 32 percent from the same period in 2016, according to suppliers familiar with GM's U.S. production schedule. The typical GM assembly plant builds 200,000-300,000 vehicles a year.COMING ATTRACTIONS: TRUCKS AND SUVS GM must "create some innovative new products" to replace slow-selling sedans "or start closing plants," said Sam Fiorani, vice president of AutoForecast Solutions. The auto maker already has begun to shift future production plans from cars to trucks, according to Morgan Stanley auto analyst John Murphy. He estimates that fewer than 10 percent of the new vehicle models that GM will introduce over the next four years will be passenger cars, with the rest divided among trucks, SUVs and crossovers. GM plans to add production of the new Cadillac XT4 crossover next year to its Malibu sedan plant in Fairfax, Kansas.

Combine a self-driving car with V2V, and here's what happens

Transportation engineers have started laying the groundwork for a traffic world in which cars communicate with other cars and infrastructure like bridges and traffic lights. How about an environment in which cars talk to pretty much everything and everyone? In a preview of its offerings at the upcoming Consumer Electronics Show, Delphi Automotive will deploy just such a concept. Engineers have designed a system that communicates with traffic signals, street signs, pedestrians, cyclists, even to fry pits and parking garages along a driver's route. To date, engineers and researchers across the auto industry have focused on the technical and safety-oriented foundation of future vehicle-to-vehicle communications, which could help cars share information about everything from traffic tie-ups to upcoming road hazards. Beyond those building blocks, many have projected that V2V could also include more consumer-focused features. Delphi's system, dubbed V2Everything, might be the first that combines those sorts of features in a tangible package. At CES in Las Vegas, scheduled to begin the first week of January, company officials say they'll demonstrate in real-world conditions how V2V technology can be used in an autonomous vehicle to provide a range of critical safety information and leisure and convenience options for riders. The first V2V technology installed on a production car is slated to appear on the 2017 Cadillac CTS. "We imagine a world with zero traffic accidents," said Jeff Owens, Delphi's chief technology officer. "To get there, we will need a convergence of active safety, sensor fusion, connectivity platforms and advanced software." Such software might allow a vehicle to start searching for and reserving parking spots at a programmed destination long before arriving. It could allow riders to place their McDonald's drive-through order from the road and have the food ready for pickup along the route. For the drive itself, the Delphi-equipped car can stay updated on the status of traffic lights around Las Vegas, and can anticipate yellow and red lights. Using smart-phone technology, the car can detect pedestrians and cyclists that may otherwise be hard to see. It can send messages to friends or family to notify them of a driver's location. Some of those features have been available on third-party apps or individually developed by automakers. But this system marries them together in a single system that is tailored for use in self-driving cars.

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.