2014 Cadillac Srx Luxury Collection on 2040-cars

Auto blog

Cadillac gives ATS, CTS new V6 for 2016

Replacing the existing 3.6-liter V6 in the Cadillac ATS and CTS is... another 3.6-liter V6. But this one promises higher output, while consuming less fuel, and making less noise. Like the V8s in the CTS-V and Escalade, it's got cylinder-deactivation technology to cut it down to a four-pot under lighter loads, as well as automatic stop/start, and comes mated to an eight-speed automatic transmission. The new engine produces 335 horsepower and 284 pound-feet of torque. That's a modest improvement over the 321 hp and 275 lb-ft mustered by the unit it replaces. But it also delivers an approximate improvement of nine percent in fuel economy and eight percent in carbon emissions. That's what we'd call a win-win, even if it's a modest one. Of course, those ATS or CTS buyers attracted to higher efficiency will still likely go for the 2.5-liter inline-four or the 2.0-liter turbo four. And those more inclined towards performance will be tempted by the 3.6-liter twin-turbo V6 in the ATS-V or CTS Vsport – or the 6.2-liter supercharged V8 in the CTS-V, for that matter. But those customers looking for the best of both worlds will surely be pleased by the improvements the new atmospheric V6 and 8-speed gearbox bring to the table. Related Video: New Technologies Boost Efficiency for 2016 CYLINDER DEACTIVATION AND START/STOP SYSTEMS BEGIN PRODUCTION ON ATS AND CTS PRODUCT LINES 2015-10-09 Renowned for luxury and design, Cadillac has recently added dynamic driving performance to its list of attributes. Now as 2016 model year production begins, Cadillac adds new fuel-saving technologies. Active Fuel Management and Automatic Stop/Start technologies, and widespread use of a new 8-speed transmission, are combining to raise fuel economy ratings and reduce emissions in Cadillac's portfolio. Cadillac's all-new six cylinder engine contains Active Fuel Management, or cylinder deactivation, technology enabling it to seamlessly switch from six-cylinder to four-cylinder operation under certain light-load conditions, while maintaining excellent performance. The new 3.6-liter engine is part of the 2016 ATS and CTS product lines. Additionally, the Cadillac Escalade luxury SUV's V8 will shift to four-cylinder operation in many daily driving conditions, as will Cadillac's all-new high performance CTS-V sedan.

Carpool Deville aims to be the world's fastest hot tub

The world needs crazy inventors with wild dreams. While we might not long for the things that they create, their contraptions certainly make the day a little more enjoyable. Take the Carpool Deville as an example. Nobody (well, almost nobody) is asking for a hot tub fashioned from a 1969 Cadillac that is still drivable. But now that you know that such a beast exists, don't try to tell us you aren't at least intrigued.
The team behind the six-year-long project has a pretty ingenious setup worked out. The Caddy's original 472-cubic-inch (7.7-liter) V8 both provides propulsion and heats the water. The interior is entirely replaced with a watertight, fiberglass tub that includes working jets, and the controls are all done by hand.
As if just building a mobile hot tub isn't enough, the team behind the Carpool Deville plans to take it racing too. Specifically, they intend to go to the Bonneville Salt Flats later this year to make a top speed run while immersed in water at over 100 degrees. They even have a roll cage all set to install to meet the safety requirements there.

Cadillac XT4 crossover to be built in Kansas City

Cadillac's upcoming XT4, a crossover we've previously known as the XT3 in a long series of spy shots of heavily camouflaged mules, will be built at General Motors' assembly plant in Kansas City on the same platform as the Chevrolet Malibu, Bloomberg reports, citing people familiar with the plan. That will give Cadillac another entry in the red-hot luxury crossover segment and, GM hopes, help to reverse a sales slump in the U.S. It'll also breath life into the Kansas City plant that makes the slow-selling Malibu, where GM cut a third shift last year, by sharing the assembly line between the crossover and sedan and defraying costs for each vehicle. The XT4 was known most recently as the XT3, with styling cues based on the Escala concept sedan from 2016. It's slightly smaller than the XT5, Cadillac's top-selling vehicle, and will also augment the full-size Escalade in Cadillac's stable of SUVs when it makes its expected debut later this year. Cadillac last week reported its second-highest-ever sales mark with 356,467 vehicles, an increase of 15.5 percent over 2016. But that mark papers over an 8 percent sales decline in the U.S. to 156,440 vehicles. The luxury brand is on a hot streak in China, where sales jumped 50.8 percent last year to 175,489 units.Related Video: Image Credit: Brian Williams Plants/Manufacturing Cadillac Chevrolet GM Crossover sales cadillac xt5 cadillac xt4 cadillac xt3