2000 Seville Sts Factory Nav Heated Seats Very Sharp Black With Chrome Wheels on 2040-cars

Auto blog

Cadillac gives ATS, CTS new V6 for 2016

Replacing the existing 3.6-liter V6 in the Cadillac ATS and CTS is... another 3.6-liter V6. But this one promises higher output, while consuming less fuel, and making less noise. Like the V8s in the CTS-V and Escalade, it's got cylinder-deactivation technology to cut it down to a four-pot under lighter loads, as well as automatic stop/start, and comes mated to an eight-speed automatic transmission. The new engine produces 335 horsepower and 284 pound-feet of torque. That's a modest improvement over the 321 hp and 275 lb-ft mustered by the unit it replaces. But it also delivers an approximate improvement of nine percent in fuel economy and eight percent in carbon emissions. That's what we'd call a win-win, even if it's a modest one. Of course, those ATS or CTS buyers attracted to higher efficiency will still likely go for the 2.5-liter inline-four or the 2.0-liter turbo four. And those more inclined towards performance will be tempted by the 3.6-liter twin-turbo V6 in the ATS-V or CTS Vsport – or the 6.2-liter supercharged V8 in the CTS-V, for that matter. But those customers looking for the best of both worlds will surely be pleased by the improvements the new atmospheric V6 and 8-speed gearbox bring to the table. Related Video: New Technologies Boost Efficiency for 2016 CYLINDER DEACTIVATION AND START/STOP SYSTEMS BEGIN PRODUCTION ON ATS AND CTS PRODUCT LINES 2015-10-09 Renowned for luxury and design, Cadillac has recently added dynamic driving performance to its list of attributes. Now as 2016 model year production begins, Cadillac adds new fuel-saving technologies. Active Fuel Management and Automatic Stop/Start technologies, and widespread use of a new 8-speed transmission, are combining to raise fuel economy ratings and reduce emissions in Cadillac's portfolio. Cadillac's all-new six cylinder engine contains Active Fuel Management, or cylinder deactivation, technology enabling it to seamlessly switch from six-cylinder to four-cylinder operation under certain light-load conditions, while maintaining excellent performance. The new 3.6-liter engine is part of the 2016 ATS and CTS product lines. Additionally, the Cadillac Escalade luxury SUV's V8 will shift to four-cylinder operation in many daily driving conditions, as will Cadillac's all-new high performance CTS-V sedan.

GM intends to offer semi-autonomous vehicles by 2020

Prepare for a few years of technological saber-rattling, as the world's automakers begin pushing to bring self-driving cars to market. Earlier this week, Nissan announced that it aims to offer autonomous vehicles by 2020, while Google, BMW and several other marks are working on similar efforts.
General Motors is doing things differently, though. Rather than push for a fully autonomous car, it's continuing to refine its semi-autonomous Super Cruise, a product that we tested in April 2012 and that will eventually see use on some Cadillacs before trickling down to the rest of the General Motors family. Super Cruise, which is undergoing testing in the Cadillac SRX, doesn't take complete control out of the driver's hands. Rather, under a very specific set of circumstances on the freeway, it will marry the capabilities of things like lane departure warning and adaptive cruise control to allow the driver to take their hands off the wheel. All of which sounds a lot like the system Mercedes-Benz is launching on the 2014 S-Class.
The system is still in development, according to John Capp, GM's director of electrical controls and active safety technology. Now that that the biggest hurdle, steering control, has been cleared, GM's engineers can focus on things like teaching the system to adapt to differing road conditions and visibility levels. As we reported in 2012, Super Cruise is still befuddled in low-visibility situations or when road markings aren't particularly clear.

GM will likely build PHEV batteries in China soon

It's a big week for batteries. Friday, Tesla will hold a big event at its Gigafactory in Reno, NV. But even in Michigan, there are things happening on the electrified automotive front. This was proven when GM invited journalists to its Brownstown Battery Assembly Plant today, highlighting the six different battery packs it makes for nine vehicles around the world (plus a tenth, coming to Asia, that has not yet been announced). During our tour, we learned a few interesting tidbits that we thought readers would like to hear: The Cadillac CT6 plug-in hybrid launches in China this fall before coming to the US next year. GM builds the battery packs in Michigan and ships them to China for final assembly in the PHEV. For now, this is all fine for GM to qualify for China's incentives for building green cars in the country. But, as Bill Wallace, GM's director of global battery systems, told AutoblogGreen, this could change thanks to the country's 'Made in China 2025' plan. The situation is "evolving," he said, and it's a safe assumption that GM will need to build packs in China some day. For the CT6 PHEVs that will be sold in the US, the batteries will make a round trip, since GM will only build the plug-in version in China. As for the range of the CT6 PHEV, that hasn't been announced, but since China offers incentives for vehicles that get at least 50 kilometers (31 miles), that's a likely target (the US range (UPDATE: GM did announce an expected range for the CT6 PHEV in the US at the LA Auto Show last fall, saying it would "travel approximately 30 miles on a full electric charge"). The battery pack in the CT6 is also a clunky box-type thing, totally unlike the near-elegant T-shape used in the Volt. This despite the fact that the guts of the two packs are similar. Both have 192 li-ion cells and weigh almost the same, but GM tuned the CT6 pack for acceleration instead of range, the way it did with the Volt's pack. Still, the main reason the packs are different is because the CT6 is a rear-wheel drive vehicle, and the tunnel that the Volt's pack uses is occupied by the driveshaft. Despite the highly touted second-gen Chevy Volt going on sale last year, GM still has the capacity to build battery packs for the old, first-gen model. This is because the company is legally required to be able to provide replacement packs for warrantied vehicles (for up to 10 years), and the second-gen packs don't fit into the first-gen vehicles.