Low Miles 21k!!! 1990 Cadillac Brougham 5.7! ****no Reserve!!!!!! on 2040-cars

Auto blog

2016 Cadillac CT6 has arrived

We have known for a while that the 2015 New York Auto Show would mark the debut of Cadillac's latest flagship model. But after months of waiting as Caddy slowly revealed details, the 2016 Cadillac CT6 has finally arrived. The sedan is a technological tour de force for the brand and inaugurates a long list of new technologies. The CT6 will begin production at the Detroit-Hamtramck Assembly plant in late 2015 and will go on sale with three engine options. Caddy won't release final figures yet, but based on preliminary numbers, we know the base 2.0-liter turbocharged four-cylinder will make 265 horsepower. Stepping up to the newly revised 3.6-liter V6 will net buyers an estimated 335 hp, and finally there will be the 3.0-liter twin-turbo V6 with an output of around 400 hp. All of these engines will be mated to eight-speed automatic transmissions, and six-cylinder models will get standard all-wheel drive that will be able to constantly vary the power sent to the front wheels. Carrying those powertrains is the new, aluminum-intensive Omega architecture. In addition to the lightweight metal making up the platform, the entire exterior also uses it to provide an estimated curb weight of less than 3,700 pounds. The decision to shed mass makes the CT6 a featherweight in its class – for comparison, the lightest, six-cylinder Audi A8 weighs 4,365 pounds. The sedan rides on a 122.4-inch wheelbase and is 204 inches long. That makes the Cadillac about 1.3 inches shorter than the smallest BMW 7 Series, but the Caddy is projected to tip the scales at less than both the big Bimmer and even the 5 Series, too. Cadillac wants the CT6 to be a luxury sedan that drivers can enjoy. In addition to the low weight, there's an available Active Chassis System throughout the range with rear-wheel steering and Magnetic Ride Control. When combined with the all-wheel-drive system, it means every corner of the car is both driving and steering the vehicle. Inside, the CT6 offers a ton of tech and luxury. Drivers are held in massaging, leather seats, and rear passengers also get adjustable chairs that are heated and cooled. Quad-zone climate controls keep everyone comfortable. Plus, in addition to the 34-speaker Bose audio system and streaming rearview mirror, there are features like a 10.2-inch CUE infotainment system with a capacitive touchscreen and console-mounted touchpad. The display also shows a 360-degree view outside and can even record video when the security system is activated.

Meet the mother-daughter team that's worked on almost every Chevy Volt

It's Mother's Day, and we're soft enough we love our mothers enough to share a new video from General Motors with you. In it, we meet Monique Watson (left) and Evetta Osbourne, a mother-daughter team that works at the Detroit-Hamtramck Assembly where GM makes the Chevy Volt (along with all of GM's other plug-in hybrids: the Opel Ampera, Holden Volt and Cadillac ELR). The two work side-by-side and have installed the lithium-ion battery pack on almost all of those vehicles - nearly 80,000 of them - since GM started making the pre-production Volts in 2009. In a prepared statement, Watson said that she likes working next to her mom, day in and day out, and they the two are totally in sync when it comes to putting the 400-pound, 16.5-kWh packs into the vehicle undersides. They two can also share stories throughout the day, and Watson said, "The arrangement has absolutely improved our relationship." Osborne started working at Detroit-Hamtramck in 1999, Watson since 2006. If you're driving a Volt today, you probably have them to thank for doing a bit of the work putting your car together. See a short video of them in action below. It's Always Mother's Day for Detroit-Hamtramck Duo Mother, daughter install lithium-ion battery pack in nearly all GM electric vehicles 2014-05-08 DETROIT – For Detroit resident Evetta Osborne, every day is Mother's Day. That's because she literally works side by side with her daughter, Monique Watson, at General Motors' Detroit-Hamtramck assembly plant. They have installed the lithium-ion battery pack on nearly every Chevrolet Volt, Opel Ampera, Holden Volt, and Cadillac ELR since production began. In fact, apart from vacation days and an occasional sick day, the mother-daughter duo has installed almost every battery pack since the Volt was in pre-production in 2009. The ELR launched earlier this year. All told – including Ampera – that's more than 80,000 electric vehicles. "We're a good team and our relationship is secondary when it comes to performing our jobs – but it's great to work alongside my daughter, said Osborne, a mother of five. Because the battery packs weigh more than 400 pounds each, automatic guided vehicles – robotic carts that use sensors to follow a path through the plant – deliver them just as the vehicle body structures glide into position overhead. The carts then lift the T-shaped packs, and Osborne and Watson guide them into the chassis and secure each one with 24 fasteners.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.