Limo Limousine Cadillac Fleetwood 1985 Classic Limo on 2040-cars

Auto blog

2016 Hennessey CTS-V is properly ridiculous with 1,000 horsepower

We truly live in a halcyon era of automotive performance with models like the latest Shelby GT350 Mustang and 707-horsepower Challenger Hellcat. And now Hennessey Performance Engineering is bringing something with absolutely obscene power to the world with its tuned 2016 Cadillac CTS-V that packs a ludicrous 1,000 horsepower. The latest CTS-V isn't even on sale yet but should be a powerhouse straight from the factory. Under its carbon fiber hood is a 6.2-liter supercharged LT4 V8 with 640 horsepower and 630 pound-feet of torque that makes the sedan capable of a 200-mile-per-hour top speed. Hennessey's take ditches the blower in favor of two turbos to feed air to the engine. To cope with the extra power, the mill gets upgrades like forged aluminum pistons and forged steel parts for the rods and crankshaft, and transmission upgrades are also necessary to make it all work. Buyers can even spec things like carbon-ceramic brakes and a widebody kit to allow for bigger tires. The crazy numbers are leading to some big performance claims from company founder John Hennessey. "I believe that our 2016 Twin Turbo CTS-V will have a top speed approaching 240 mph," he said in the Caddy's announcement. Hennessey is building just 24 of these 1,000-horsepower sedans for the 2016 model year. However, for those that want to keep the supercharger under the hood, the company is also offering upgrades with 750 hp and 800 hp for the CTS-V too. All of them sound absolutely ridiculous in an utterly fantastic way. 2016 HPE1000 Twin Turbo Cadillac CTS-V Texas Tuner Plans to Build World's Fastest 4-Door Sedan Sealy, Texas-When the next generation Cadillac CTS-V hits the streets later this year, it will have 640+ hp and a top speed of nearly 200 mph. To the team at Hennessey Performance Engineering (HPE), this is a good starting point. The company plans to pick-up where they left off with the last gen CTS-V by producing the world's fastest 4-door sedan: The Hennessey HPE1000 Twin Turbo CTS-V. "A couple of years ago, the State of Texas gave us the opportunity to test one of our specially tuned CTS-Vs – our VR1200 Twin Turbo coupe. It ran 221 mph (356 km/h) on State Highway 130, near the Circuit of the Americas", said company founder, John Hennessey. "It was still pulling on when we ran out of road. I believe that our 2016 Twin Turbo CTS-V will have a top speed approaching 240 mph (386 km/h)". Hennessey plans to offer a limited run of only 24 units for the 2016 model year.

2015 Cadillac ATS Coupe prepares to fight BMW 4 Series

Cadillac introduced its new ATS Coupe at the 2014 Detroit Auto Show today, bringing customers an alternative to the growing range of sport luxury coupes typified by the BMW 4 Series, Audi A5 and Mercedes-Benz C-Class Coupe.
The ATS Coupe, as a slightly more premium offering, ditches the wheezy 2.5-liter engine found in the basic ATS Sedan, but retains the four-door's 2.0-liter, turbocharged four-cylinder and 3.6-liter V6. That four-pot turbo benefits from a fettling that has increased torque from 260 pound-feet to 295, although its peak is only available from 3,000 rpm to 4,600 rpm, unlike in the sedan, where peak twist arrives at just 1,700 rpm and sticks around until 5,500 rpm.
Power can be channeled to either the rear or all four wheels by the owner's choice of a Tremec six-speed manual or a six-speed automatic transmission. According to Cadillac, the new Coupe can get to 60 in 5.6 seconds when fitted with the 2.0-liter turbo.

GM won't really kill off the Chevy Volt and Cadillac CT6, will it?

General Motors is apparently considering killing off six slow-selling models by 2020, according to Reuters. But is that really likely? The news is mentioned in a story where UAW president Dennis Williams notes that slumping US car sales could threaten jobs at low-volume factories. Still, we're skeptical that GM is really serious about killing those cars. Reuters specifically calls out the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala, Chevrolet Sonic, and the Chevrolet Volt. Most of these have been redesigned or refreshed within the past few model years. Four - the LaCrosse, Impala, CT6, and Volt - are built in the Hamtramck factory in Detroit. That plant has made only 35,000 cars this year - down 32 percent from 2016. A typical GM plant builds 200,000-300,000 vehicles a year. Of all the cars Williams listed, killing the XTS, Impala, and Sonic make the most sense. They're older and don't sell particularly well. On the other hand, axing the other three seems like an odd move. It would leave Buick and Cadillac without flagship sedans, at least until the rumored Cadillac CT8 arrives. The CT6 was a big investment for GM and backing out after just a few years would be a huge loss. It also uses GM's latest and best materials and technology, making us even more skeptical. The Volt is a hugely important car for Chevrolet, and supplementing it with a crossover makes more sense than replacing it with one. Offering one model with a range of powertrain variants like the Hyundai Ioniq and Toyota Prius might be another route GM could take. All six of these vehicles are sedans, Yes, crossover sales are booming, but there's still a huge market for cars. Backing away from these would be essentially giving up sales to competitors from around the globe. The UAW might simply be publicly pushing GM to move crossover production to Hamtramck to avoid closing the plant and laying off workers. Sales of passenger cars are down across both GM and the industry. Consolidating production in other plants and closing Hamtramck rather than having a single facility focus on sedans might make more sense from a business perspective. GM is also trying to reduce its unsold inventory, meaning current production may be slowed or halted while current cars move into customer hands. There's a lot of politics that goes into building a car. GM wants to do what makes the most sense from a business perspective, while the UAW doesn't workers to lose their jobs when a factory closes.