1950 Cadillac Fleetwood Model 60 Special, Robin's Egg Blue on 2040-cars

Auto blog

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

2017 Cadillac XT5 First Drive

Thousands of feet above the Pacific Ocean, the winding roads that lead to the summit of Palomar Mountain turn from undulating curves to tight, blind, hairpin bends. Most drivers along this route are looking for a chance to exploit the limits of their cars' handling as much as one can on public roads, while taking in the bucolic views and endless blue skies. Up here, taking the thrilling curves at high speed is best left for drivers of performance cars who have platinum health insurance, lest the possibility of rolling a vertical mile toward Hellhole Canyon Preserve (we are not making this up) is not a deterrent. How different the experience is when you've chosen to climb the mountain in the 2017 Cadillac XT5, the crossover that replaces the SRX in a growing lineup of refined and redefined XT-named utility vehicles. An instant reminder that this SUV is not a Lotus comes as we enter a corner with a smidgen too much gusto, the tires begin to claw for traction, and the seatbelts tighten with the grip of sudden death. A quick tap of the brakes releases the belts, but not before a bead of sweat forms on the forehead. The overwhelming feeling is one of being unsure if this exercise is out of the XT5's comfort zone, despite Cadillac's goal of hitting the high-achieving sweet spot of the sport-luxury crossover segment. You'll know that an XT5 isn't an SRX when you first see one, although the differences are harder to tell when the two are parked side by side. The XT5 is the second Cadillac model to arrive since the brand learned to speak with a New York accent (albeit an affected Soho dialect) and it's a key pillar to the brand's chances at worldwide success. In 2015, the final year of sales for the five-year-old SRX, Cadillac managed to sell almost 100,000 of them around the world – no small feat for a model about to be replaced, and proof of the crossover's relative freshness and its popularity in export markets like China. Like the SRX that precedes it, the XT5 will be available with either front- or all-wheel drive (a $2,645 option), but that's one of few commonalities with the outgoing model. A new, lighter chassis helps the XT5 shed about 300 pounds, although Cadillac favors high-strength steel for bodywork and leaves aluminum for the engine and interior trim. In line with the revised brand guidelines for naming, SRX evolved into XT5, leaving room for larger and smaller utility vehicles to eventually join the lineup.