Awd Cd Abs Brakes Adjustable Foot Pedals Air Conditioning Alloy Wheels Cargo Net on 2040-cars

Auto blog

Hotter Cadillac ATS-V+ could use LS7 power

Rumor has it Cadillac is working on an even hotter version of the ATS-V, possibly called ATS-V+. And the latest intel from Motor Trend suggests this new model might have a great, big V8 under the hood. The V8 in question is the high-revving, naturally aspirated 7.0-liter LS7 from the Camaro Z/28. The hand-built engine makes 505 horsepower and 481 pound-feet of torque in the Z/28 – a nice increase over the 464 hp and 445 lb-ft in the standard ATS-V, which uses a twin-turbocharged 3.6-liter V6. Motor Trend says the ATS-V+ will come to market with an eight-speed automatic transmission, as well as the seven-speed manual 'box from the Corvette. A dual-clutch transmission will come to market later. Of course, we'll believe it when we see it. But an LS7-powered ATS-V sure sounds like a great package to us. Here's hoping.

Cadillac CTS-V spotted with big exhaust, new grille?

If you thought Cadillac was content to leave its twin-turbocharged Vsport as the range-topping CTS, think again. Behold, our first good glimpse at the next-generation Cadillac CTS-V sedan, sporting more aggressive styling (somewhere under there), meaty quad-exhaust pipes, and what very well could be a new face for the V-badged Caddies.
Creating an all-new grille design seems like an awful lot of work just for a prototype, so it's very possible that the vertical-bar treatment you see here could make its way into production. Our spy photographers have pointed out that they've seen this same sort of grille treatment on prototypes for the smaller ATS-V sedan, and we've heard V-series models may soon have greater differentiation from the standard vehicles that sired them - that seems especially necessary if Cadillac insists on expanding this whole Vsport range.
Regardless of how its front end looks, the CTS-V ought to be a real monster. Industry sources say we can expect to see a supercharged version of General Motors' 6.2-liter V8 under the Caddy's hood, and considering the current car already makes 556 horsepower and 551 pound-feet of torque, we wouldn't be surprised to see a decent increase in both of those numbers. After all, one of the CTS-V's main competitors, the Mercedes-Benz E63 AMG, is currently putting out 550 hp and 590 lb-ft of torque. Could this mean a 600-hp Cadillac is on the horizon?

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.