2009 Cadillac Escalade Hybrid Sport Utility 4-door 6.0l Certified No Reserve ! on 2040-cars

Auto blog

Cadillac planning more Vsport models

There's a new intermediate class of luxury performance cars emerging. Audi has been doing it for years with its S-line bridging the gap, in many cases, between the standard fare and the full-on RS performance range. BMW's getting in on it with the M Sport line slotting in below the full M models. And now Cadillac is joining the fun with its Vsport offerings.
Models like the CTS Vsport and XTS Vsport are packing a new 3.6-liter twin-turbo V6 with 410 or more horsepower (along with bigger wheels and brakes) to slot in between the standard model and any impending V variant. Well, it appears Cadillac isn't about to stop there.
Speaking with The Detroit News, Cadillac product chief Hampden Tener revealed that, based on the response to the XTS Vsport, the brand is planning more Vsport models. He did not, however, indicate which would be the next to get the slightly sportier treatment. With the full ATS-V expected to pack a version of the same engine powering the aforementioned XTS and CTS Vsport models, an ATS Vsport would have to pack a smaller engine to fit in below. That only leaves the SRX crossover, Escalade SUV and the upcoming ELR hybrid. Food for thought.

New V6 engines are only the start at Cadillac

Cadillac debuted its new family of V6 engines Friday, but that's not all General Motors' luxury brand has in store for the coming years. The six-cylinder powerplants will certainly help Cadillac in the near term, but they're just two of the many parts of the company's future strategy. GM has invested $12 billion in Cadillac to help the brand grow over the next five years, and the company will launch eight new products between now and 2020. That all starts with the launch of the CT6 flagship later this year – a fullsize luxury sedan we'll see for the first time in New York on March 31. The CT6 will introduce several new features and technologies to the Cadillac range, and with its launch also begins the slow restructuring of Cadillac's model-naming system. The new nomenclature means CT and XT badges for cars and utilities, respectively. Cadillac says that of the eight new vehicles it plans to launch by 2020, five of them will be first-time offerings in market segments where the brand currently does not play. But it's not just about new products – new powertrains are an important part of the Cadillac story, too. After the new V6 engines – a naturally aspirated 3.6-liter and a twin-turbocharged 3.0-liter engine – launch later this year in the 2016 ATS, CTS and CT6, the company says it has a strategy for V8 power – possibly a twin-turbo application – as well as future electrification. Cadillac also says it's working on adding four- and six-cylinder diesel powertrains, though it's unclear which vehicles will make use of those engines. This new six-cylinder engine family is indeed important, with Cadillac's chief engineer, David Leone, calling it the "most advanced V6 in the industry." With 335 horsepower, the 3.6-liter engine is the highest output, naturally aspirated V6 powerplant Cadillac has done – and that's SAE-certified, and on regular fuel. Beyond that, the 3.0-liter mill (pictured at right) marks the first application of GM's active fuel management system on a twin-turbocharged engine. This means that when full power isn't necessary, the TTV6 can run as a 2.0-liter V4 in order to save fuel. New transmissions are also part of the V6 engine story. GM's all-new eight-speed Hydra-Matic 8L45 gearbox will be paired to the 3.6-liter V6, and the 3.0-liter TTV6 will use the company's existing 8L90 transmission that is already found in the Chevrolet Silverado and GMC Sierra pickups (with the 6.2-liter engine).

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.