2006 Cadillac Escalade Limo, Limousine, Wrecked For Parts Or Repair, Clear Title on 2040-cars

Auto blog

Cadillac ATS Coupe spy photos show more sedate two-door

Remember when the Cadillac CTS Coupe debuted, and we were all like, "Oh hello there?" Well, don't expect the same thing to happen when the new ATS Coupe is unveiled - these brand new (overexposed) spy shots show a two-door that's decidedly more sedate than the angular yet curvaceous and all-around good-looking CTS Coupe. This isn't to say that the smaller Caddy Coupe won't be attractive - the four-door version is plenty pretty, to be sure - it just likely won't have that extra somethin'-somethin' to truly set it apart from the sedan.
Fine, then. We don't doubt that the two-door ATS will be just as enjoyable to drive as its sedan sibling, with a lot of the mechanical stuff likely carrying over unchanged. That includes the powertrain options, meaning buyers will be able to choose from the naturally aspirated 2.5-liter inline-four, turbocharged 2.0-liter four, or larger free-breathing 3.6-liter V6.
Look for the 2014 ATS Coupe to enter production in January of next year, meaning a reveal later this year (LA Auto Show, perhaps?) would be in order.

Buy a Mosler Twinstar, the V16 Cadillac you almost wanted [w/video]

Cadillac was once famous for opulent, V16 luxury vehicles, but this bizarre 16-cylinder 1999 Eldorado that's for auction on eBay Motors isn't much like its ancestors. Dubbed the TwinStar, this beast features a Northstar V8 with 275 horsepower to drive the front wheels and a second Northstar with 300 hp is in the trunk to spin the rear axle. Each mill has its own four-speed automatic gearbox, and the result is a total of 575 hp of all-wheel drive fury in an incredibly weird package. The TwinStar's interior and exterior certainly don't hide the odd powertrain setup. To fit the engine in the trunk, the builders pushed the rear wheels further back and lengthened the wheelbase. There are also scoops low on each side to funnel air to the V8. Inside, there's a second ignition on the side of the center stack, and a digital instrument cluster replaces the glove box. It's sure to confuse any passenger you can convince to take a ride in this thing. Mosler, the supercar company known for models like the MT900, built five TwinStars, according to the auction. The seller links to the original review by Car and Driver, and the magazine noted that the sensation of the two engines working in tandem was rather odd. However, the TwinStar was a capable performer and ran to 60 in 5 seconds in its test. If you want to start your new year with the oddest vehicle possible, the TwinStar's auction sits at $5,600 with the reserve not met as of this writing, and it ends January 2, 2016, at 8:00 PM ET. If you can't wait that long, the dealer lists the car online for $39,900. There's also a spirited conversation on Bring a Trailer about this automotive oddity.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.