1999 Cadillac D'elegance on 2040-cars

Auto blog

Cadillac CT6 PHEV battery shape a big departure for GM's plug-in hybrid tech

Anyone with any familiarity with the electric powertrain details for the two General Motors plug-in hybrids will have noticed that the information we have about the newly announced Cadillac CT6 plug-in hybrid has a lot of numbers in common with the Chevy Volt and the Cadillac ELR, like the 18.4-kWh lithium-ion battery pack and an expected all-electric range of 37 miles. We also noticed that the announcement calls the plug-in CT6 hybrid an actual plug-in hybrid and not an "extended range electric vehicle (EREV)," which is what GM calls the Volt and the ELR. This, of course, means we needed to ask GM some questions. Donny Nordlicht from Cadillac communications told AutoblogGreen that while the Volt and CT6 batteries are both 18.4-kWh, the shape is completely different. In the Volt/ELR, the battery is T-shaped (see it here). The CT6 has four seats, with a tunnel running between the two in the rear, as you can see here, but the battery in the CT6 PHEV is "a cube-shaped pack, which is between rear seats and the trunk," Nordlicht said. "There is no pass through." GM has not yet released any technical schematics about this pack, but Nordlicht said that, "The CT6's advanced mixed-material platform was designed to accommodate the PHEV system by design so that it minimally intrudes on the cabin space." It also means that the CT6 can be ordered as an optional PHEV, while the Volt and ELR were purpose-built plug-ins. GM is also distinguishing between the EREV and PHEV powertrains in its vehicles from this point forward. "We are not discarding the EREV language," Nordlicht said. "The CT6 utilizes a two-motor system mated to a 2.0T 4-cylinder engine, which is an all-new system to Cadillac." We assume that the PHEV packs will use li-ion cells from LG Chem, just like the EREVs do, but Nordlicht did not answer our question on that point. As for other details about the CT6 PHEV – like production, full dimension, and pricing – we will just have to wait until closer to when the vehicle launches for those. Related Video:

Cadillac ATS Coupe headed for Detroit reveal

Cadillac wouldn't be Cadillac without its two-door models. But the XLR has been discontinued for over four years now, the Elmiraj concept may never see production and the future of the CTS Coupe is still up in the air. That leaves just the ELR, which may not be conventional enough for traditional Cadillac coupe buyers. Fortunately a new coupe is coming along to fill the void.
According to Edmunds, Cadillac will reveal the new ATS coupe just a couple of months from now at the Detroit Auto Show. Expected to mechanically mirror the existing ATS sedan, the new coupe will also more conventionally resemble its four-door counterpart than the CTS, whose coupe version was distinguished by a rakishly sloping roofline.
Expect the same choice of engines to carry over, with a 2.5-liter four serving as the base engine, and both a 2.0-liter turbo four and a 3.6-liter V6 offering more power for those looking for that extra bit of oomph. Following the Detroit reveal, sources anticipate the ATS coupe to go on sale next summer.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging