1993 Cadillac Deville on 2040-cars

Auto blog

2014 Cadillac XTS gets 410-hp twin-turbo V6

General Motors told us so back in March, but it is now official: The twin-turbocharged 3.6-liter V6 announced for the 2014 Cadillac CTS will also join the options list for the 2014 Cadillac XTS. The LF3 engine puts out 410 horsepower and 369 pound-feet of torque in the XTS, however, which is 10 hp and 61 lb-ft down from its application in the CTS. It will be identifiable from the outside by a specific grille treatment and a badge on the decklid. The 3.6-liter V6 with 304 hp and 264 lb-ft holds steady as the standard engine, and both will be yoked to a six-speed automatic transmission with paddle shifters.
Also new for the front-wheel drive model for 2014 are updates that include electric power steering and optional Automatic Parking Assist that can maneuver the sedan into parallel parking spots. The three trims above standard - Luxury, Premium and Platinum - get Intellibeam headlights that automatically switch between high- and low-beam,
The four current trim levels remain but the list of optional extras for the higher specs grows with a rear-seat entertainment system equipped with DVD screens in the front seatbacks, memory settings for the front passenger seat and an armrest in the back seat fitted with radio and sunshade controls. The press release below has more info on all of the changes.

Mercedes leads in US luxury car thefts

Mercedes-Benz makes some fine automobiles. The Silver Arrow'd cars are so good, apparently, that thieves can't help but try to steal them. The German brand is at the top of the charts for luxury car thefts in the US, according to the National Insurance Crime Bureau, with New York City leading the way. (And those New Yorkers complain about Detroit being bad!)
The C-Class was the most stolen model, with 485 ganked between 2009 and 2012 in NYC alone, while the E-Class and S-Class (which also boasted the worst recovery rate, at 59 percent) both finished in the top ten. Following the C-Class was the BMW 3 Series and Infiniti G. Not surprisingly, each of these were the most common models in their respective lineups. Los Angeles and Miami are also prime hotspots for luxury car thefts, according to the Detroit News report.
While getting your car stolen is pretty awful, there was one inspiring statistic compiled by the NICB - the average recovery rate across the board was 84 percent, with the Cadillac CTS getting recovered 91 percent of the time.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.