Find or Sell Used Cars, Trucks, and SUVs in USA

1957 Cadillac Coupe Deville on 2040-cars

Year:1957 Mileage:90000 Color: Pink /
 White
Location:

Branson, Missouri, United States

Branson, Missouri, United States
Transmission:Automatic
Body Type:Coupe
Engine:v8
Vehicle Title:Clear
Year: 1957
Interior Color: White
Make: Cadillac
Number of Cylinders: 8
Model: DeVille
Trim: Coupe 2 door
Drive Type: rwd
Options: Leather Seats
Mileage: 90,000
Number of Doors: 2
Exterior Color: Pink
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

1957 Cadillac

Good Shape. Runs,  but the engine does need to be rebuilt.

Some work has been done such as new brakes, radiator, vacuum pump, master cylinder.

All original manuals. We are the second owner.

ALL numbers match.

PLEASE do NOT message or email on ebay. This is my dad's vehicle and I am listing and selling it for him. Please call Doug at 417-230-9737. CALL only, he does not respond to text messages. Thank you.

Auto Services in Missouri

Wrightway Garage ★★★★★

Auto Repair & Service
Address: 8813 Veterans Memorial Pkwy, Old-Monroe
Phone: (636) 240-9650

Southwest Auto Parts ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Body Shop Equipment & Supplies
Address: 5345 Southwest Ave, Maplewood
Phone: (314) 776-3355

Smart Buy Tire ★★★★★

Auto Repair & Service, Auto Oil & Lube, Tire Dealers
Address: 1045 S Campbell Ave, Springfield
Phone: (417) 889-2886

Sedalia Power Sports ★★★★★

Auto Repair & Service, Engine Rebuilding & Exchange, All-Terrain Vehicles
Address: 5004 S Limit Ave, Sedalia
Phone: (660) 829-1829

Raymond Smith Body Shop ★★★★★

Automobile Body Repairing & Painting, Glass-Wholesale & Manufacturers, Glass-Auto, Plate, Window, Etc
Address: 505 E US Highway 136, Albany
Phone: (660) 726-3223

Payless Car Care Center ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 605 SW State Route 7, Greenwood
Phone: (816) 229-1997

Auto blog

Cadillac president de Nysschen says electrification coming 'across the spectrum'

Thu, Jan 22 2015

We like to pick on new Cadillac president Johan de Nysschen for his insistence, many years ago, when he was president of Audi of America, that plug-in vehicles are for idiots. Listening to him give the keynote address at the Washington Auto Show today, you wouldn't know he ever said anything negative about an electric vehicle. Instead, he sounds something like a EV-angelist. De Nysschen said that Cadillac will be able to benefit from GM's considerable expertise in plug-in technology, which he said would be "applied across the spectrum of our portfolio." GM's electric committment will help in "making electrification commonplace." With the plug-in ELR already on the road, de Nysschen said that the company's next step in advancing powertrains will be the introduction of stop/start technology – which de Nysschen called an "important system to reduce fuel consumption and CO2 emissions" – into a Cadillac for the first time later this year. Without giving any specific details, de Nysschen said that Cadillac will introduce eight new models (not necessarily plug-ins) by the end of this decade, including five that "will take Cadillac into market segments where the brand is not even present today." These new vehicles will likely be much lighter than today's vehicles, de Nysschen said, because "weight reduction today is critical to automotive design, it helps to improve fuel efficiency and contributes to desireable vehicle dynamics." The key is to reduce weight without compromising safety or comfort and to use the right material – steel, aluminum, carbon fiber – in the right place at the right time. It was a not-so-subtle jab at Ford and its new aluminum F-150. "In the pursuit of weight reduction, some manufacturers have also opted for abandoning steel and have gone for an all-aluminum approach," he said. "At Cadillac, we believe that different materials each present particular advantages in specific applications. There is no single material that represents the optimum balance of the conflicting objectives of every single application." Related video:

GM to idle car production at five factories as Americans continue CUV love affair

Mon, Dec 19 2016

In case you needed another reminder that Americans have fallen out of love with sedans, General Motors today announced plans to idle five factories in January in a bid to cut its inventory to 70 days. Detroit-Hamtramck Assembly ( Buick LaCrosse, Cadillac CT6, Chevrolet Volt and Impala) and Fairfax Assembly in Kansas ( Chevy Malibu) will stop production for three weeks. Lansing Grand River ( Cadillac ATS and CTS, and Chevy Camaro) is going down for two weeks, while Lordstown, OH ( Chevy Cruze) and Bowling Green, KY ( Chevy Corvette) will go idle for a week each, Automotive News reports. GM's shutdown reflects a broader problem with the company's supply – at 847,000 vehicles, the company's supply increased unsteadily from a low of 629,000 units in January of 2016. That's more than a 25 percent increase in the past year. Citing information from Autodata, The Detroit News reports that at the end of November, GM had a 168-day supply of LaCrosses, 177 days' worth of Camaro, 170 days of Corvette, 121 days for Cruze, 119 days for ATS, 132 days for CTS, and 110 days of CT6. Meanwhile, inventory of the company's more popular vehicles is actually below the professionally accepted 60- to 70-day supply, The News reports. The Trax, Colorado pickup, and GM's full-size SUVs are sitting below 50 days and experiencing year-over-year sales increases. GM needs a rethink of its inventory levels, which is something that's apparently coming. "We're going to be responsible in managing our inventory levels," GM spokesman Jim Cain told The News. Another unnamed spokesman told Automotive News the company's day-to-day supplies would "fluctuate before moderating at year-end." But at least one analyst thinks this won't be the last time Detroit needs to stop production to level things out. "Incentives are elevated, residuals are declining, and rates are rising," Brian Johnson, an analyst with Barclays, told The News. "And while GM in particular may benefit in the months ahead from new product launches, it's important to recognize that GM's inventory is elevated at the moment, and it wouldn't surprise us if they need to announce another production cut – which could pressure the stock." Related Video: News Source: The Detroit News, Automotive News - sub. req.Image Credit: Paul Sancya / AP Plants/Manufacturing Buick Cadillac Chevrolet GM GMC Crossover SUV Sedan bowling green cadillac xt6 fairfax

Cadillac CT6 styling will be evolutionary, not like Elmiraj

Wed, Dec 17 2014

Well, this is at least a little disappointing. It turns out Cadillac's long-awaited flagship, the CT6, won't be ushering in a wholesale change in the company's design. That's coming from GM Design guru Ed Welburn, meaning it should be taken as gospel (unless of course he's just trying to hoodwink us). "It'll be different and it will certainly stand out in the portfolio," Welburn told Automotive News. "But you won't see a real shift in direction." Instead, Art and Science will be shown in yet another new form, and will "continue to evolve," according to Welburn, although what that means is unclear. What we can say for certain, though, is that Art and Science on the CT6 will not evolve into the stunning Elmiraj Concept. "I think Elmiraj was more of an influence on some other things we're working on for Cadillac," Welburn said, we're guessing with a smirk and an air of mystery. Considering we have yet to see the CT6, it's hard to tell whether this will be good news or bad, although based on the critical reception to the Elmiraj, we're a little bit disappointed by Welburn's statements. Still, only time will tell whether the styling of the CT6 will really work out.